Service parts for the CFP7EVS-F10
Grouped by system, with how many of each the parts manual calls for.
Air intake
1 requiredElectrical
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | No. 2 diesel only |
|---|---|
| Prime power | 114 kW |
| Emissions | EPA Tier 3 |
| Controller | Fire Pump Digital (FPDP) |
| Oil capacity | 14.2 L |
| Voltage options | 12 V, 24 V |
| Battery cranking | [1400, 1400] CCA |
| Sound level | 92.5 dBA |
Engine
| Oil capacity | 14.2 L |
|---|---|
| Coolant capacity | 14.2 L |
| Displacement | 6.7 L |
| Aspiration | Turbocharged and Charge-Air Cooled |
| Rated speed | 1470 rpm |
Maintenance & consumables
for the Cummins/Onan QSB6.7| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Cummins Filtration AH1196 (standard) and AF26124/AF26125 (heavy duty) | AF26124 | Amazon $145.55 eBay $60.00 KuduParts $107.00 | ||
| Fuel filter | Cummins Filtration FF5612 (primary) and FS1212 (secondary) | — | |||
| Oil filter | Full-flow with by-pass valve | — | |||
| Battery | 12V-DC, 1500 watts | 12V-DC | Amazon Amazon eBay eBay $69.95 FridayParts $11.85 | ||
| Belt | Belt guard | — | |||
| Coolant | Tube and shell type, 60 PSI with NPTF connections | 14.2 L | — | ||
| Coolant filter | Tube and shell type, 60 PSI with NPTF connections | — | |||
| Oil | Oil pressure range at rated: 40-70 PSI (276-483 kPa) | — | |||
| Spark plug | Engine only - cold cranking amperes: 1400 CCA*; Engine only - reserve capacity: 430 minutes* | — |
Service specifications
4| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Other | Pressure sensing line nominal size inside diameter | 1/2 | in. (12.7 mm) | connected between the transducer (located under the FPDP) and the pump discharge flange and the discharge check valve |
| Pressure | Cooling loop cooling water pressure limit | 270 | psi | installations where the discharge pressure is greater than 270 psi (pressure reducing valve required upstream of the cooling loop) |
| Pressure | Discharge set point pressure / maximum control pressure | 100/110, 170/175, or 240/250 | psi | set by the factory and not adjustable; specify at time of order |
| Pressure | VSPLC set point range | 100 to 400 | psi |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What engine is in the Cummins/Onan CFP7EVS-F10?
The Cummins/Onan CFP7EVS-F10 is powered by the Cummins/Onan QSB6.7 engine.
What fuel does the Cummins/Onan CFP7EVS-F10 use?
The Cummins/Onan CFP7EVS-F10 runs on No. 2 diesel only.
What is the oil capacity of the Cummins/Onan CFP7EVS-F10?
The Cummins/Onan QSB6.7 engine in the Cummins/Onan CFP7EVS-F10 has an oil capacity of 14.2 liters.
What air filter does the Cummins/Onan CFP7EVS-F10 use?
The Cummins/Onan CFP7EVS-F10 uses air filter part number AF26124.
Parts
1| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 9851268101e | LinkOne parts catalogue, CD | Service part / kit | Amazon |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.