Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 200 kW |
| Standby kVA | 250 |
| Prime power | 180 kW |
| Emissions | Tier III |
| Controller | PCC1301, PowerCommand |
| Oil capacity | 26.5 L |
| Alternator | Cummins/Onan UCDI274J (208/480), HCI434C (480/600 V switchable) |
| Voltage options | 24 V |
| Phase | DC |
| Power factor | 0.8 |
| Circuit breaker | [800, 400] A |
| Battery group | 2 |
| Battery cranking | 750 CCA |
| Battery voltage | 12 V |
| Battery quantity | 2 |
| Coolant capacity | 28.6 L |
| Max ambient | 50 °C |
| Dimensions (L×W×H) | 3700×1450×1700 mm |
| Dry weight | 2721 kg |
| Sound level | 97.0 dBA @ 7 m |
| Fuel tank | 28.6 L |
Maintenance & consumables
for the Cummins/Onan 4ISBe| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Filter, Air − Normal Duty | A047M180 | Amazon eBay $236.52 PartsGeek | ||
| Fuel filter | Strata pore fuel filter | — | 500 hr | find | |
| Oil filter | — | 1000 hr | find | ||
| Belt | — | 1000 hr | find | ||
| Coolant | 26.95 | — | |||
| Oil | 18.9 | — |
Common questions
What is the power rating of the Cummins/Onan C200?
The Cummins/Onan C200 is rated 200 kW standby (250.0 kVA).
What engine does the Cummins/Onan C200 use?
The Cummins/Onan C200 is powered by the Cummins/Onan 4ISBe engine.
What fuel does the Cummins/Onan C200 use?
The Cummins/Onan C200 runs on Diesel.
What is the oil capacity of the Cummins/Onan C200?
The Cummins/Onan 4ISBe engine in the Cummins/Onan C200 has an oil capacity of 26.5 liters.
What alternator does the Cummins/Onan C200 use?
The Cummins/Onan C200 uses a Cummins/Onan UCDI274J (208/480), HCI434C (480/600 V switchable) alternator.
What air filter does the Cummins/Onan C200 use?
The Cummins/Onan C200 uses air filter part number A047M180.
Troubleshooting
2Fault codes
| Code | Meaning | Cause |
|---|---|---|
| 251 | Unknown J1939 Fault | Can be caused by battery disconnection/isolation without a run data save operation. |
Symptoms & remedies
| Symptom | Remedy |
|---|---|
| Flash-out of Fault Codes | 1. The diagnostic mode key switch must be in the On (I) position to flash out the fault codes. 2. In the diagnostic mode: a) With no active faults, the Warning and Stop lamps will be illuminated without flashing OR b) With active faults, the ECM will begin to flash out codes by first turning on the Warning lamp. 3. The Warning lamp will then turn off and the ECM will begin flashing the Stop lamp in sequence to represent the active fault code number. 4. As the fault code is flashed, short pauses will occur to indicate completion of each digit. The Warning lamp will illuminate to indicate the beginning of a fault code. 5. The ECM will continue to flash a fault until the operator uses the Fault increment (↑) or decrement (↓) rocker switch to change to a new fault. |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.
Parts
13| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 4915973 | Alternator Manual | Alternator | PartsGeek | |
| A047M180 | Filter, Air − Normal Duty | 1 | Air filter | Amazon eBay $236.52 PartsGeek |
| A054E584 | Filter, Air − Heavy Duty | 1 | Air filter | Amazon eBay PartsGeek |
| A055Z870 | Filter, Air − Replacement − Heavy Duty | 1 | Air filter | Amazon eBay $251.32 PartsGeek |
| AN500T0013 | STARTER MOTOR | Starter | PartsGeek | |
| AN500T0083 | ALTERNATOR | Alternator | PartsGeek | |
| PI144D1 | Alternator Model | 1 | Alternator | PartsGeek |
| UC274C | Alternator Model | 1 | Alternator | PartsGeek |
| UC274K | Alternator Model | 1 | Alternator | PartsGeek |
| 00270 | Guía detallada | A | Service part / kit | PartsGeek |
| 3666496 | Service part / kit | PartsGeek | ||
| 518-0601 | Sealant, Thread (6 ml Tube) | 1 | Service part / kit | PartsGeek |
| V2403-M-E3BG | Engine Model | 1 | Service part / kit | PartsGeek |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 17.0 | 4.5 |
| Standby | 25% | 18.9 | 5.0 |
Available documents
Spec sheet — diesel-gen-set-rating-cards-international-60hz-2025 (Cummins/Onan)Spec sheet — s-1616 (Cummins/Onan)Operator's manual — 908-0118V2 Cummins Power Command Control 1301 Rental Part 2 (11-2009) (Cummins/Onan)