Service parts for the C13
Grouped by system, with how many of each the parts manual calls for.
Air intake
1 requiredFuel system
1 requiredOil system
1 requiredBelts
1 requiredHydraulic system
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 350 kW |
| Standby kVA | 400 |
| Prime power | 280 kW |
| Emissions | China III NR |
| Controller | EMCP 4.2, EMCP 4.2B |
| Oil capacity | 20.8 L |
| Alternator | LC7224N |
| Voltage options | 208 V, 220 V, 240 V, 480 V, 600 V |
| Phase | 3 |
| Rated current | 2602.2 A |
| Power factor | 0.8 |
| Circuit breaker | 100 A |
| Battery group | 24 |
| Battery cranking | 1000 CCA |
| Battery voltage | 12 V |
| Battery quantity | 2 |
| Coolant capacity | 97.8 L |
| Max ambient | 57 °C |
| Dimensions (L×W×H) | 4948×2014×2320 mm |
| Dry weight | 4863 kg |
| Fuel tank | 699.0 L |
| Tank runtime | 1569 hr |
Engine
| Oil capacity | 20.8 L |
|---|---|
| Coolant capacity | 11.5 L |
| Displacement | 13.0 L |
| Aspiration | ATAAC |
| Rated speed | 1800 rpm |
Filters for the Caterpillar C13
7Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Oil filter | P551808 | Lube Filter, Spin-On Full Flow | CATERPILLAR 1R1808, CATERPILLAR 1R808, NAPA 7792, BALDWIN B7299 | KuduParts $80.00 |
| Fuel filter | P551311 | Fuel Filter, Spin-On Secondary | CATERPILLAR 1R0749, CATERPILLAR 3089679, BALDWIN BF7587, TAMROCK 019854051 | KuduParts $147.00 FridayParts $151.84 |
| Fuel filter | P550625 | Fuel Filter, Spin-On Secondary | CATERPILLAR 1165436, CATERPILLAR 1R0762, NAPA 3640, BALDWIN BF7753 | buy |
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Fuel / water separator | P551000 | Fuel Filter, Water Separator Spin-On Twist&Drain | CATERPILLAR 2568753, CATERPILLAR 3I2113, NAPA 3406, BALDWIN BF1259 | FridayParts $99.00 |
| Fuel / water separator | P550737 | Fuel Filter, Water Separator Cartridge | BALDWIN PF7755, ORENSTEIN & KOPPEL 103865, MACK 2191P550737, INTERNATIONAL 2586814C1 | KuduParts $29.00 |
| Coolant filter | P554071 | Coolant Filter, Spin-On | CATERPILLAR 1112369, CATERPILLAR 1112370, NAPA 4071, WALGAHN-MOTORENTECHN 00811412 | FridayParts $397.60 |
| Coolant filter | P554685 | Coolant Filter, Spin-On Non-Chemical | CATERPILLAR 3I1300, CATERPILLAR 4059558, NAPA 4070, MTU 0002040791 | buy |
Maintenance & consumables
for the Caterpillar C13| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Air filter inner | 106-3973 | Amazon eBay $79.98 eBay $39.31 NAPA $116.29 FridayParts $62.16 | ||
| Fuel filter | Filter fuel | 1R0749 | Amazon Amazon eBay $135.88 eBay $135.88 NAPA $28.51 NAPA $28.51 KuduParts $17.00 FridayParts $47.50 | ||
| Oil filter | Filter oil | 1R1808 | Amazon eBay $141.00 eBay $59.99 NAPA $45.70 NAPA $45.70 KuduParts $80.00 FridayParts $81.99 | ||
| Battery | Inspect, Clean | — | 30000 hr | ||
| Belt | V-belt | 230-7198 | eBay $19.99 | ||
| Coolant | 61.0 L | — | 30000 hr | ||
| Hydraulic filter | Filter hydraulic | 093-7521 | eBay $29.99 NAPA $45.52 KuduParts $18.00 FridayParts $19.99 | ||
| Oil | 210.0 L | — | 30000 hr | ||
| Spark plug | Replace (if equipped) | — | 30000 hr |
Service intervals
14| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| Engine oil (S-O-S oil sample) | Test | 125 hr | Severe service occurs at high loads, in high temperatures, and in dusty conditions | |
| Coolant (S-O-S coolant analysis Level 1) | Test | 250 hr | Cat ELC - Every 250 Hours; also the recommended sampling interval for all conventional heavy-duty coolant/antifreeze and for commercial coolants that meet Cat EC-1 | |
| Engine crankcase oil (S-O-S oil sample) | Test | 250 hr | Table 6 S-O-S Oil Sampling Interval; severe applications may require a more frequent oil sampling interval | |
| Primary air filter element | Change | 250 hr | When changing the primary element at 250 operating hours (basis of the without-indicator filter-change comparison) | |
| SCA (Supplemental Coolant Additive) concentration | Test | 250 hr | Test the concentration of SCA or submit a coolant sample at 250 hour intervals or at PM Level 1 intervals; check at every oil change or every 250 hours, whichever occurs first | |
| Coolant (S-O-S coolant analysis Level 2) | Test | 500 hr | 12 mo | First service — For new systems, refilled systems, and converted systems that use Cat ELC or Cat DEAC; also every year; use the interval that occurs first |
| oil | Change | 500 hr | 3000 Series service intervals increased to 500 hours as standard (3013C, 3024C, 3054, 3056) | |
| Secondary air filter element | Change | 750 hr | When changing the secondary element at 750 operating hours (basis of the without-indicator filter-change comparison) | |
| Cat ELC Extender addition (cooling system) | Other | 6000 hr | Treat the cooling system with Cat ELC Extender at 6000 hours or one half of the coolant service life | |
| Coolant (Cat ELC) | Change | 12000 hr | 12000 service hours or six years; use the interval that occurs first | |
| minor overhaul | Other | 20000 hr | 3600 engines designed to run 20 000 hours between minor overhauls using No. 2 fuel | |
| major overhaul | Other | 40000 hr | 3600 engines designed to run 40 000 hours between major overhauls using No. 2 fuel | |
| cylinder liners and pistons | Other | 80000 hr | 3600 cylinder liners and pistons designed for 80 000 hours using No. 2 fuel | |
| Coolant (S-O-S coolant analysis Level 1 and Level 2) | Test | 12 mo | Cat DEAC - Yearly |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Service specifications
21| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Other | Gross Input Torque (TH55-E70) | 12 667 | N•m (9350 lb-ft) | |
| Other | Gross Input Torque (TH55-E90) | 12 677 | N•m (9350 lb-ft) | |
| Other | Radiator cooling package design ambient temperature | 48.9 | °C (120° F) | with 50/50 water/Extended Life Coolant mixture |
| Other | Radiator cooling package maximum elevation | 1524 | m (5000 ft) | with 50/50 water/Extended Life Coolant mixture |
| Other | Stall Torque Ratio (TH55-E70) | 2.23 | ||
| Other | Stall Torque Ratio (TH55-E90) | 2.23 | ||
| Pressure | Maximum air pressure for cleaning purposes (deadheaded air nozzle with chip guarding and PPE) | 205 | kPa | |
| Pressure | Maximum air pressure for cleaning purposes (deadheaded air nozzle with chip guarding and PPE) | 30 | psi | |
| Pressure | Maximum water pressure for cleaning purposes | 275 | kPa | |
| Pressure | Maximum water pressure for cleaning purposes | 40 | psi | |
| Pressure | Unit injector fuel injection pressure | 1240 | bar (18 000 psi) | |
| Pressure | WS255 pump plunger load | 238,000 | lb (107,960 kg) | |
| Pressure | WS273XD pump plunger load | 275,000 | lb (124 738 kg) | |
| Pressure | WS305XD pump plunger load | 250,000 | lb (113 398 kg) | |
| Speed | Maximum Input Speed (TH55-E70/TH55-E90 transmissions) | 1970 | rpm | |
| Speed | Rated Input Speed (TH55-E70/TH55-E90 transmissions) | 1900 | rpm | |
| Temperature | Maximum storage temperature for ether cylinders | 120 | °F | |
| Temperature | Maximum storage temperature for ether cylinders | 49 | °C | |
| Temperature | Maximum storage temperature for ether cylinders (Engine Starting section) | 102 | °F | |
| Temperature | Maximum storage temperature for ether cylinders (Engine Starting section) | 39 | °C | |
| Torque | Air compressor SAE "A" hydraulic pump drive maximum torque (374 L/min and 467 L/min compressors) | 60 | N•m (44 lb-ft) | C7, C9 ACERT |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Coolant | 50/50 mixture water/Caterpillar Extended Life Coolant | below 48°C | Radiator cooling packages designed for up to 48.9° C (120° F) ambient; coolant sump refill capacities vary by oil sump/pan (18 L to 106 L service refill with new oil filter change) | ||
| Coolant | Cat DEAC | Diesel; 3,000 Service Hours or Three Years; annual S·O·SSM Level 2 coolant sampling and analysis | |||
| Coolant | Cat DEAC (Diesel Engine Antifreeze/Coolant) | Acceptable coolant; commercial heavy-duty antifreeze/coolant must meet ASTM D4985 or ASTM D6210 | Conventional heavy-duty coolant/antifreeze. Caterpillar recommends a 1:1 mixture of water and glycol. Do not use a commercial coolant/antifreeze that only meets the ASTM D3306 specification. Do not use Cat SCA at the initial fill when Cat DEAC is used. | ||
| Coolant | Cat ELC | Diesel; 12,000 Service Hours or Six Years; add Cat ELC Extender at 6,000 service hours or one half of service life; annual S·O·SSM Level 2 coolant sampling and analysis | |||
| Coolant | Cat ELC (Extended Life Coolant) | Caterpillar EC-1 specification (preferred); also meets ASTM D4985, ASTM D6210, and ASTM D3306 | Service life of 12000 service hours or six years. Premixed ELC provides freeze protection to -37 C (-34 F); ELC Concentrate can be used to lower the freezing point to -52 C (-62 F). An Extender is the only additional maintenance needed at 6000 service hours or one half of the ELC service life. Cat ELC cooling systems can withstand contamination to a maximum of ten percent of conventional heavy-duty coolant/antifreeze and/or SCA. | ||
| Coolant | Cat NGEC | Natural Gas; 16,000 Service Hours or Three Years; use interval that occurs first | |||
| Coolant | Cat SCA (Supplemental Coolant Additive) with water | SCA concentration in a cooling system that uses SCA and water should be six to eight percent by volume; do not exceed the eight percent maximum concentration. If Cat SCA is not used, the commercial SCA must provide a minimum of 2400 mg/L or 2400 ppm (140 grains/US gal) of nitrites in the final coolant mixture when used with water, and a minimum of 1400 mg/L or 1400 ppm (82 grains/US gal) with heavy-duty coolant/antifreeze. | |||
| Coolant | Glycol (ethylene glycol / propylene glycol) | Propylene glycol coolant must meet ASTM D6210-04 | Ethylene glycol: 50 percent = freeze protection -37 C (-34 F), boil protection 106 C (223 F); 60 percent = -52 C (-62 F), 111 C (232 F). Propylene glycol: 50 percent = -32 C (-26 F), 106 C (223 F). Do not use propylene glycol in concentrations that exceed 50 percent; do not use ethylene glycol in concentrations that exceed 60 percent. All Caterpillar diesel engines equipped with air-to-air aftercooling (ATAAC) require a minimum of 30 percent glycol. | ||
| Engine oil | Cat DEO (Diesel Engine Oil) 10W-30 and 15W-40 | Cat ECF-1 (exceeds); API CI-4, API CI-4 PLUS, API CH-4, API CG-4, API CF (Cat DEO SAE 15W-40) | Caterpillar oils are used to fill diesel engines at the factory. Non-Caterpillar commercial oils are second choice oils. Do not use API CF-4 oils in Caterpillar diesel engines. Do not use single grade API CF oils or multigrade API CF oils in 3500 Series, C175 Series and smaller DI diesel engines. | ||
| Engine oil | Cat NGEO | Natural Gas | |||
| Engine oil | Commercial oils (DI engines) | Cat ECF-1 required; API CG-4 multigrade acceptable; API CH-4, API CI-4 and API CI-4 PLUS acceptable only if the requirements of Cat ECF-1 are met; do not use API CF-4 oils | Minimum TBN must be 10 times the fuel sulfur level (ASTM D2896); minimum TBN of the oil is 5 regardless of a low fuel sulfur level. API CG-4 oils: do not exceed the standard oil drain interval. | ||
| Engine oil | Commercial oils (PC engines) | Cat ECF-1; API CH-4, API CI-4, API CI-4 PLUS (if Cat ECF-1 requirements met); API CG-4 multigrade; API CF-4 multigrade; API CF | Minimum TBN of the oil that is used in PC engines must be 20 times the fuel sulfur level; minimum TBN of new oil is five. Change the oil when the TBN deteriorates to 50 percent of the original TBN. | ||
| Engine oil | Re-refined base stock oils | Acceptable if they meet the performance requirements specified by Caterpillar; filtering is inadequate for producing high quality re-refined base stock oils. | |||
| Engine oil | Synthetic base stock oils | Acceptable if they meet the performance requirements specified for the engine compartment. Caterpillar does not recommend the automatic extension of oil drain intervals for any type of oil. | |||
| Engine oil | Cat Arctic DEO SYN SAE 0W-30 | -40°C to 30°C | Engine Crankcase; Industrial Engines | ||
| Engine oil | SAE 0W-20 | -40°C to 10°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | SAE 0W-30 | -40°C to 30°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | SAE 0W-40 | -40°C to 40°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | Cat DEO SYN SAE 5W-40 | -30°C to 50°C | Engine Crankcase; Industrial Engines | ||
| Engine oil | SAE 5W-30 | -30°C to 30°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | SAE 5W-40 | -30°C to 50°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | Cat DEO SAE 10W-30 | -18°C to 40°C | Engine Crankcase; Industrial Engines | ||
| Engine oil | SAE 10W-30 | -18°C to 40°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines); SAE 10W-30 is the preferred viscosity grade for the 3116, 3126, C7, C-9 and C9 diesel engines between -18 C (0 F) and 40 C (104 F) | ||
| Engine oil | SAE 10W-40 | -18°C to 50°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | Cat DEO SAE 15W-40 | -9°C to 50°C | Engine Crankcase; Industrial Engines | ||
| Engine oil | SAE 15W-40 | -9°C to 50°C | Table 1 Lubricant Viscosities for Ambient Temperatures (DI diesel engines) | ||
| Engine oil | Cat SAEO SAE 30 | API CF-4 category | 0°C to 40°C | Table 2 - 3116 and 3126 Marine Engines with mechanical unit injection; factory fill has API CF-4 category and viscosity grade of SAE 30 | |
| Engine oil | SAE 30 | 0°C to 40°C | Table 3 Lubricant Viscosities for Ambient Temperatures - PC engines only | ||
| Engine oil | Cat SAEO SAE 40 | API CF-4 category | 5°C to 50°C | Table 2 - 3116 and 3126 Marine Engines with mechanical unit injection. Caterpillar does not recommend the use of multigrade oils in the 3116 and 3126 Marine Diesel Engines that use mechanical unit injection. | |
| Engine oil | SAE 40 | 5°C to 50°C | Table 3 Lubricant Viscosities for Ambient Temperatures - PC engines only |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Procedures
3Determining the cause of a plugged fuel filter (ice or wax) diagnostic
- Remove the fuel filters.
- Cut the fuel filters open.
- Inspect the fuel filter before the filter warms. The inspection will show that the filter is filled with particles of either ice or wax.
Changing to Cat ELC maintenance
⚠ Do not leave an empty SCA maintenance element on a system that is filled with ELC. The element housing may corrode and leak causing an engine failure.
⚠ Improper or incomplete rinsing of the cooling system can result in damage to copper and other metal components.
⚠ The cooling system cleaner must be thoroughly flushed from the cooling system. Cooling system cleaner that is left in the system will contaminate the coolant. The cleaner may also corrode the cooling system.
Tools: Caterpillar cleaner for cooling systems, 5P-3413 Pipe Sealant, Suitable containers to collect fluids
- Drain the coolant into a suitable container.
- Dispose of the coolant according to local regulations.
- If equipped, remove the empty SCA maintenance element and the element base. Plug the coolant lines or bypass the coolant lines.
- Flush the system with clean water in order to remove any debris.
- Use Caterpillar cleaner for cooling systems in order to clean the system. Follow the instructions on the label.
- Drain the cleaner into a suitable container. Flush the cooling system with clean water.
- In systems with heavy deposits, disconnect the hoses. Clean deposits and debris from the hoses and fittings. Install the hoses and tighten the hose fittings.
- Fill the cooling system with clean water and operate the engine until the engine is warmed to 49 C to 66 C (120 F to 151 F).
- Drain the cooling system into a suitable container and flush the cooling system with clean water.
- Repeat Steps 8 and 9 until the system is completely clean.
- Fill the cooling system with the Cat ELC.
- Operate the engine until the engine is warmed. While the engine is running, inspect the engine for leaks. Tighten hose clamps and connections in order to stop any leaks.
- Attach the Special Publication, PEEP5027, "Label" to the cooling system filler for the engine in order to indicate the use of Cat ELC.
Calculating the amount of lighter fuel required to modify the cloud point or the pour point operation
- Obtain the specification for the cloud point or the pour point of both fuels from your fuel supplier.
- Locate the cloud point or the pour point of the heavier fuel on the left side of the table. Mark the point on the table.
- Locate the cloud point or the pour point of the lighter fuel on the right side of the table. Mark the point on the table.
- Draw a line between the two points that were established. Label this line "A".
- Find the lowest outside temperature for machine operation on the left side of the table. Draw a horizontal line from this point until it intersects line "A". Label this new line "C".
- Mark the intersection of line "C" and line "A". Draw a vertical line to the bottom of the table. Label this line "B". The point at the bottom of line "B" reveals the percentage of lighter fuel that is
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What is the power rating of the Caterpillar C13?
The Caterpillar C13 is rated 350 kW standby (400.0 kVA).
Which engine powers the Caterpillar C13?
The Caterpillar C13 is powered by the Caterpillar C13 engine.
What kind of fuel does the Caterpillar C13 run on?
The Caterpillar C13 runs on diesel.
What's the oil capacity on a Caterpillar C13?
The Caterpillar C13 engine in the Caterpillar C13 has an oil capacity of 20.8 liters.
What is the coolant capacity of the Caterpillar C13?
The Caterpillar C13 cooling system holds 97.8 liters (25.8 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the continuous rating of the Caterpillar C13?
The Caterpillar C13 is rated 280 kW prime (350 kVA), against 350 kW standby.
How much does the Caterpillar C13 weigh?
The Caterpillar C13 has a dry weight of 4863 kg (10721 lb).
What size fuel tank does the Caterpillar C13 have?
The Caterpillar C13 has a 699 liter (185 US gallon) fuel tank, giving about 1569 hours of runtime.
What voltages is the Caterpillar C13 available in?
The Caterpillar C13 is offered in 208 V, 220 V, 240 V, 480 V, 600 V, 3-phase.
How many cold cranking amps does the Caterpillar C13 require?
The Caterpillar C13 uses 2 batteryies, 12 V each, 1000 CCA, group 24, per the manufacturer specification sheet.
What alternator comes on the Caterpillar C13?
The Caterpillar C13 uses a LC7224N alternator.
Which oil filter part number does the Caterpillar C13 take?
The Caterpillar C13 uses oil filter part number 1R1808.
What fuel filter does the Caterpillar C13 use?
The Caterpillar C13 uses fuel filter part number 1R0749.
What air filter fits the Caterpillar C13?
The Caterpillar C13 uses air filter part number 106-3973.
Parts
174| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 093-7521 | Filter hydraulic | 1 | Hydraulic filter | eBay $29.99 NAPA $45.52 KuduParts $18.00 FridayParts $19.99 |
| 101-2844 | 1 gallon (3.8L) | 1 gallon (3.8L) | Fluid | Amazon eBay |
| 106-3973 | Air filter inner | 1 | Air filter | Amazon eBay $79.98 eBay $39.31 NAPA $116.29 FridayParts $62.16 |
| 111-2369 | Maintenance Element | 1 | Coolant filter | Amazon eBay $26.35 NAPA $21.06 |
| 119-5152 | Cat Engine Oil (quart bottle) | quart bottle | Fluid | Amazon eBay |
| 126-2081 | Filter oil | 1 | Oil filter | eBay $27.00 KuduParts $42.00 FridayParts $44.11 |
| 142-5867 | Front seal | Seal | eBay $41.66 FridayParts $39.38 | |
| 1R0749 | Filter fuel | 1 case (12 x 1 quart) | Fuel filter | Amazon Amazon eBay $135.88 eBay $135.88 NAPA $28.51 NAPA $28.51 KuduParts $17.00 FridayParts $47.50 |
| 1R0755 | Filter fuel | Fuel filter | Amazon eBay $34.99 eBay $96.90 NAPA $82.67 NAPA $82.67 KuduParts $54.00 FridayParts $71.99 | |
| 1R1808 | Filter oil | Oil filter | Amazon eBay $141.00 eBay $59.99 NAPA $45.70 NAPA $45.70 KuduParts $80.00 FridayParts $81.99 | |
| 211-2660 | Air filter assy | Air filter | eBay $25.17 NAPA $42.90 | |
| 230-2781 | Hose | Hose | eBay $90.99 | |
| 230-2782 | Hose | Hose | eBay $69.56 | |
| 230-2854 | Hose | Hose | eBay $60.91 | |
| 230-7198 | V-belt | 1 | Belt | eBay $19.99 |
| 247-7133 | Thermostat | Thermostat | Amazon eBay $107.00 eBay $41.00 FridayParts $27.50 | |
| 326-1641 | Axial seal FWS | 1 | Fuel filter | Amazon eBay $23.00 NAPA $58.84 |
| 326-1643 | Filter water separator | 1 | Fuel filter | Amazon eBay $25.00 NAPA $66.22 KuduParts $22.00 FridayParts $105.00 |
| 328-3655 | Filter hydraulic/transmission | 1 | Hydraulic filter | eBay $58.72 NAPA $121.25 |
| 384-8611 | Lift/transfer pump | Pump | eBay $358.00 SinoCMP $219.00 KuduParts $312.00 FridayParts $322.09 | |
| 384-8612 | Lift/transfer pump | Pump | eBay $358.00 KuduParts $148.00 FridayParts $159.99 SinoCMP $259.00 | |
| 3S3875 | Filter fuel | Fuel filter | eBay $49.99 | |
| 7M4705 | V-belt | Belt | eBay $45.95 NAPA $48.82 FridayParts $82.99 | |
| 8N0205 | Filter water separator | Fuel filter | eBay $60.00 NAPA $79.10 FridayParts $35.00 | |
| 9CT002 | NOx Control System | Sensor | Amazon eBay $476.42 | |
| A-23537529 | Juego de Anillos | Piston ring set | Amazon eBay | |
| AP70121 | Diesel particulate filter (DPF) | 2 | Dpf | Amazon eBay |
| AP70122 | DPF gasket | 1 | Gasket | Amazon eBay |
| AP70123 | Diesel particulate filter (DPF) | 1 | Dpf | Amazon eBay |
| AP70313 | DPF gasket | 2 | Gasket | Amazon eBay |
| AP70314 | DPF gasket | 2 | Gasket | Amazon eBay |
| M-1043560 | Cylinder Liner Seal Ring | 6 | Seal | Amazon eBay |
| M-1095308 | Oil Pan Seal | 1 | Seal | Amazon eBay |
| M-1375541 | 1 Fuel Priming Pump Tall | 1 | Pump | Amazon eBay |
| M-1842380C95 | Ensamble Empaque y Arnés | 1 | Set | Amazon eBay |
| M-1875869C92 | Camshaft Bushing Kit DT466E/570E | Bearing | Amazon eBay | |
| M-1889116C92 | Bomba de Agua | 1 | Pump | Amazon eBay |
| M-1946722 | Sensor - Pressure | AR | Sensor | Amazon eBay |
| M-1946724 | Sensor - Pressure | AR | Sensor | Amazon eBay |
| M-1946725 | Sensor - Pressure | AR | Sensor | Amazon eBay |
| M-1P0436 | Fuel Priming Pump Gasket | 1 | Gasket | Amazon eBay |
| M-2173673 | Oil Pan Seal | 1 | Seal | Amazon eBay |
| M-2231608 | Oil Pump | 1 | Pump | Amazon eBay |
| M-2246361 | Regulator Housing Gasket | 1 | Gasket | Amazon eBay |
| M-2266620 | Rear Structure Set | 1 | Gasket | Amazon eBay |
| M-2274239ORK | Injector Sleeve O-Ring Kit | 6 | Seal | Amazon eBay |
| M-2275075 | Regulator Housing Gasket | 1 | Gasket | Amazon eBay |
| M-2303728 | Injector Seal Ring Intermediate | 1 | Seal | Amazon eBay |
| M-2303775 | Injector Seal Ring Upper | 1 | Seal | Amazon eBay |
| M-2395581 | Remanufactured Fuel Injector - M-2395581 | Remanufactured fuel injector | Amazon eBay | |
| M-2481394 | Injector O-Ring Kit | 6 | Seal | Amazon eBay $8.61 |
| M-2644297 | Sensor - Temperature | AR | Sensor | Amazon eBay |
| M-2655324 | Oil Cooler Set | 1 | Gasket | Amazon eBay $176.39 |
| M-2655326 | Oil Pump Set - External | 1 | Gasket | Amazon eBay |
| M-2847707 | Remanufactured Fuel Injector - M-2847707 | Remanufactured fuel injector | Amazon | |
| M-3136846 | Central & Lower Set | 1 | Gasket | Amazon eBay |
| M-3136847 | Fuel System Set | 1 | Gasket | Amazon eBay |
| M-3136898 | Front Structure Set | 1 | Gasket | Amazon eBay |
| M-3142771 | Water Pump Installation Set | 1 | Gasket | Amazon eBay |
| M-3149899 | Air Compressor Set | 1 | Gasket | Amazon eBay |
| M-3348404 | Rear Structure Set | 1 | Gasket | Amazon eBay |
| M-3348407 | Water Pump Installation Set | 1 | Gasket | Amazon eBay |
| M-3520206 | Water Pump | 1 | Pump | Amazon eBay |
| M-3804703 | Front Crankshaft Seal Kit QSK19 | Crankshaft seal kit | Amazon eBay | |
| M-3804705 | Accessory Drive Seal Kit QSK19 | Accessory drive seal kit | Amazon eBay | |
| M-3848611 | Pump - Transfer | Pump | Amazon eBay | |
| M-3S9643 | 1 Regulator Seal | AR | Seal | Amazon eBay |
| M-4089717 | Juego de Emp. Inferior | 1 | Gasket set | Amazon eBay |
| M-4089902 | Jgo – Reten Trasero | Crankshaft seal kit | Amazon eBay | |
| M-4352286 | Engine Kit ISX1 & ISX2 | Engine kit | Amazon eBay $3572.10 | |
| M-4352287 | Engine Kit ISX & Signature | Engine kit | Amazon eBay $3572.10 | |
| M-4352289 | Engine Kit ISX870 & ISX07 High HP | Engine kit | Amazon eBay $3572.10 | |
| M-4352290 | Engine Kit ISX870 & ISX07 | Engine kit | Amazon eBay $3416.65 | |
| M-4367102 | Turbocharger Installation Set | 1 | Gasket | Amazon eBay |
| M-4388606 | Front Structure Set | 1 | Gasket | Amazon eBay |
| M-4390524 | Turbocharger Installation Set | 1 | Gasket | Amazon eBay |
| M-4394077 | Central & Lower Set | 1 | Gasket | Amazon eBay |
| M-4394451 | Oil Cooler Set | 1 | Gasket | Amazon eBay |
| M-4446485 | Gasket Set - C13-C15-C18 Front Structure | Gasket set | Amazon eBay | |
| M-4513316 | Gasket Set - Central & Lower | Gasket | Amazon eBay | |
| M-4532206 | Gasket Set - Front Structure | Gasket | Amazon eBay | |
| M-4696623 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-4698465 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-4732196 | Gasket Set - Turbocharger | Gasket | Amazon eBay | |
| M-4732197 | Gasket Set - Water Pump | Gasket | Amazon eBay | |
| M-4758997 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-4940654 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-4941095 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-4955222 | Juego de Emp. Superior | 1 | Gasket set | Amazon eBay |
| M-4999229 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-5025189 | Gasket Set - Oil Cooler | Gasket | Amazon eBay | |
| M-5298564 | Laina – Camisa - .020" | 1 | Oil filter | Amazon eBay |
| M-5298565 | Laina – Camisa - .032" | 1 | Oil filter | Amazon eBay |
| M-6D7146 | Seal Ring - Body to Cover | 1 | Seal | Amazon eBay |
| M-6V7350 | Water Pump Mounting Seal | 1 | Seal | Amazon eBay |
| M-7L6580 | By Pass Tube Seal | 2 | Seal | Amazon eBay |
| M-7W2479 | Alambre de bujía | 1 | Spark plug | Amazon eBay |
| M-9X7317 | Injector Seal Ring Lower | 1 | Seal | Amazon eBay |
| M-RSC13E | Ring Set C13 | Ring set | Amazon eBay | |
| MCB3408341 | Jgo de Juntas Completo | 1 | Gasket set | Amazon eBay $3223.21 |
| MCB3408342 | In-Chassis Gasket Set 3408E | 1 | Gasket set | buy |
| MCB3408343 | Cylinder Head Gasket Set 3408E | 1 | Gasket set | Amazon eBay $1598.63 |
| MCB3569946 | Piston | 1 | Piston | Amazon eBay |
| MCBC13013 | Cylinder Head Gasket Set | 1 | Gasket | Amazon eBay $675.00 |
| MCBC13021 | Overhaul Gasket Set | 1 | Gasket | Amazon eBay |
| MCBC13022 | In-Chassis Gasket Set | 1 | Gasket | Amazon eBay |
| MCBC13031 | Overhaul Gasket Set | 1 | Gasket | Amazon eBay |
| MCBC13032 | In-Chassis Gasket Set | 1 | Gasket | Amazon eBay |
| MCBC13033 | Cylinder Head Gasket Set | 1 | Gasket | Amazon eBay $979.67 |
| MCBC13041 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13041GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13042 | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13042GC | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13043 | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13043GC | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13051 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13051GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13061 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13061GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13071 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13071GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13072 | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13072GC | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13073 | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13073GC | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13081 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13081GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13082 | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13082GC | In-Chassis Gasket Set | Gasket | Amazon eBay | |
| MCBC13083 | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13083GC | Cyl. Head Gasket Set | Gasket | Amazon eBay | |
| MCBC13091 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13091GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13111 | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13111GC | Major O/H Gasket Set | Gasket | Amazon eBay | |
| MCBC13HBK | Head Bolt Kit - MCBC13HBK | Head bolt kit | Amazon eBay | |
| MCBC16ESK | Exhaust Manifold Stud Kit C16 | Exhaust manifold stud kit | Amazon eBay | |
| PEHJ0170 | Air Inlet Shutoff | Air filter | Amazon eBay | |
| R-10R0725 | Injector - Rebuilt | 6 | Injector | Amazon eBay |
| R-10R0961 | Injector - Rebuilt | 6 | Injector | Amazon eBay |
| R-10R0966 | Injector - Rebuilt | 6 | Injector | Amazon eBay |
| R-10R0968 | Injector - Rebuilt | 6 | Injector | Amazon eBay |
| R-10R2977 | Injector - Rebuilt | 6 | Injector | Amazon eBay |
| 10R-8774 | Oil Pan Sump | Service part / kit | Amazon eBay | |
| 10R-8775 | Oil Pan /Sump | Service part / kit | Amazon eBay | |
| 10R-8776 | Oil Pan Sump | Service part / kit | Amazon eBay | |
| 10R-8777 | Oil Pan Sump | Service part / kit | Amazon eBay | |
| 10R-8778 | Oil Pan Sump | Service part / kit | Amazon eBay | |
| 10R-8809 | Oil Pan /Sump | Service part / kit | Amazon eBay | |
| 10R-8810 | Oil Pan Sump | Service part / kit | Amazon eBay | |
| 10R-8811 | Oil Pan /Sump | Service part / kit | Amazon eBay | |
| 10R-8812 | Oil Pan /Sump | Service part / kit | Amazon eBay | |
| 10R-8813 | Oil Pan /Sump | Service part / kit | Amazon eBay $959.00 | |
| 10R-8830 | Oil Pan / Sump Turbo Mount | Service part / kit | Amazon eBay | |
| 10R-8831 | Oil Pan / Sump Turbo Mount | Service part / kit | Amazon eBay | |
| 10R-8832 | Oil Pan / Sump Turbo Mount | Service part / kit | Amazon eBay | |
| 10R-8833 | Oil Pan / Sump Turbo Mount | Service part / kit | Amazon eBay | |
| 10R-8834 | Oil Pan / Sump Turbo Mount | Service part / kit | Amazon eBay | |
| 128-4124 | Kit without Conditioner | Service part / kit | Amazon eBay | |
| 163-1128 | Kit with Liquid | Service part / kit | Amazon eBay | |
| 163-1129 | Kit with Element | Service part / kit | Amazon eBay | |
| 2239150 | Connecting rod | Service part / kit | Amazon eBay $180.50 | |
| 888-983-7847 | ENGINE BLOCK CRANKSHAFT | 1 | Service part / kit | Amazon eBay |
| 8T1589 | Maintenance Charge | Service part / kit | Amazon Amazon eBay $29.76 eBay | |
| 8T9190 | Refill Charge | Service part / kit | Amazon eBay | |
| M-2237467 | Camshaft | Service part / kit | Amazon eBay | |
| M-2477133 | 1 Regulator - 190ºC | AR | Service part / kit | Amazon eBay $59.00 |
| M-3882310 | Piston | Service part / kit | Amazon eBay | |
| M-CK3882310P | Cylinder Kit | Service part / kit | Amazon eBay $599.99 | |
| MCBC13ESK | Exhaust Stud Kit - MCBC13ESK | Service part / kit | Amazon eBay | |
| MCIF3882310 | Inframe Kit | Service part / kit | Amazon eBay | |
| MCIF3882310-1 | Inframe Kit | Service part / kit | Amazon eBay | |
| MCOH3882310 | Overhaul Kit | Service part / kit | Amazon eBay | |
| MCOH3882310-1 | Overhaul Kit | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 59.4 | 15.6 |
| Prime | 50% | 100.3 | 26.5 |
| Prime | 75% | 146.3 | 38.6 |
| Prime | 100% | 188.5 | 49.7 |
| Standby | 25% | 63.5 | 16.7 |
| Standby | 50% | 108.9 | 28.7 |
| Standby | 75% | 164.3 | 43.4 |
| Standby | 100% | 205.5 | 54.2 |
Available documents
Engine spec — C13 (Caterpillar)Engine spec — Cat Pure Performance RV LEDT4628 (Caterpillar)Engine spec — EnginesWithPureAttitude (Caterpillar)Engine spec — LECH3874-02 (Caterpillar)Engine spec — LEDT3136-01 (Caterpillar)Engine spec — LEHT4679-04 HR P1 (Caterpillar)Engine spec — LEHT8892-00 (Caterpillar)Engine spec — c13rvspecsheet (Caterpillar)Engine spec — lech3874-04 (Caterpillar)Engine spec — leht4570-02 (Caterpillar)Engine spec — leht4679-00 (Caterpillar)Spec sheet — CM20180613-09835-43526 (Caterpillar)Reference — Caterpillar-Oil-and-Gas-Ratings-Guide-2021-03 (Caterpillar)Reference — LECW2462-25 1 oil gas (Caterpillar)Reference — ledh6161 attachments guide (Caterpillar)Owner's manual — C11, C13 and C15 On-highway Engines-Engine Safety (Caterpillar)Parts manual (Caterpillar)Parts manual — CAT-C18-750kW-Submittal (Caterpillar)Parts manual — Caterpillar Engines (Caterpillar)Parts manual — KMP-Brand®Parts-Guide-Suitable-for-Caterpillar®By-Product (Caterpillar)Parts manual — LFDH6161-00 HR (Caterpillar)Parts manual — PEHJ0235-01 (Caterpillar)Service manual — Caterpillar Diesel Engine Fluid Recommendations (Caterpillar)
This page was generated from the 23 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.