Specifications
| Fuel | Diesel |
|---|---|
| Standby power | 10 kW |
| Prime power | 10 kW |
| Emissions | U.S. EPA T4 Final & CARB |
| Controller | DynaGen TG350 |
| Oil capacity | 4.4 L |
| Alternator | Mecc Alte NPE32 2S 4C |
| Voltage options | 120 V, 80 V, 240 V, 40 V |
| Battery group | Group 24 |
| Battery cranking | 750 CCA |
| Coolant capacity | 5.2 L |
| Dry weight | 128 kg |
| Fuel tank | 45.0 L |
Engine
| Oil capacity | 4.9 L |
|---|---|
| Coolant capacity | 5.2 L |
| Displacement | 1.131 L |
| Aspiration | Naturally aspirated |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Perkins 403F-11G| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Oil filter | — | 500 hr | |||
| Oil | — | 500 hr |
Common questions
What is the power rating of the Aurora Generators AGi10P?
The Aurora Generators AGi10P is rated 10 kW standby.
Which engine powers the Aurora Generators AGi10P?
The Aurora Generators AGi10P is powered by the Perkins 403F-11G engine.
What kind of fuel does the Aurora Generators AGi10P run on?
The Aurora Generators AGi10P runs on Diesel.
What is the oil capacity of the Aurora Generators AGi10P?
The Perkins 403F-11G engine in the Aurora Generators AGi10P has an oil capacity of 4.9 liters.
What is the coolant capacity of the Aurora Generators AGi10P?
The Aurora Generators AGi10P cooling system holds 5.2 liters (1.4 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How much does the Aurora Generators AGi10P weigh?
The Aurora Generators AGi10P has a dry weight of 128 kg (283 lb).
What size fuel tank does the Aurora Generators AGi10P have?
The Aurora Generators AGi10P has a 45 liter (12 US gallon) fuel tank.
What voltages is the Aurora Generators AGi10P available in?
The Aurora Generators AGi10P is offered in 120 V, 80 V, 240 V, 40 V.
What battery does the Aurora Generators AGi10P use?
The Aurora Generators AGi10P uses 750 CCA, group Group 24, per the manufacturer specification sheet.
What alternator does the Aurora Generators AGi10P use?
The Aurora Generators AGi10P uses a Mecc Alte NPE32 2S 4C alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 50% | 1.37 | 0.36 |
| Standby | 75% | 2.05 | 0.54 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.