Home›Engines›Perkins 1104D

Perkins 1104D Engine

The Perkins 1104D is a 4.4 L 4-cylinder turbocharged engine rated at 1800 rpm, producing up to 1104 kW. It powers generator sets from Perkins, including the 1104D-44T IOPU. It holds 8.4 L (2.2 gal) of oil and 1104 L (291.6 gal) of coolant.

Also known as: Perkins 1104D

Part of the Perkins 1104D engine family — 16 variants share parts & fitment.

4.399 L
Displacement
4
Cylinders
1800 rpm
Rated speed
1104 kW
Gross power

Service parts for the 1104D

The cheapest captured merchant offer per filter — see the full cross-reference below for every OEM/aftermarket option.

Air intake

1 required
P635903Air filterfind

Prices captured from merchant listings; some links are affiliate links. Verify against your serial number before ordering.

Engine specifications

Oil capacity8.4 L
Coolant capacity1104.0 L
Displacement4.399 L
Cylinders4
Aspirationturbocharged
Rated speed1800 rpm
Gross power1104 kW

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filter2 stage cyclonic/paper elementWA11994 Amazon eBay $114.47
Fuel filter—
Oil filter—
Battery—
Belt—
Coolant—
Coolant filter—
Oil—
Spark plug—

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Service specifications

4
TypeItemValueUnitCondition
OtherCompression Ratio16.2:1
SpeedOperating range750 to 2650rpm
Valve clearanceValve Lash Setting (Exhaust)0.35mm
Valve clearanceValve Lash Setting (Inlet)0.35mm

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Procedures

1
Welding on Engines with Electronic Controls repair

⚠ Do not ground the welder to electrical components such as the ECM or sensors. Improper grounding can cause damage to the drive train bearings, hydraulic components, electrical components, and other components.

Tools: Welder, Ground clamp

  1. Stop the engine. Turn the switched power to the OFF position.
  2. Disconnect the negative battery cable from the battery. If a battery disconnect switch is provided, open the switch.
  3. Disconnect the J1/P1 connectors from the ECM. Move the harness so it cannot contact ECM pins.
  4. Connect the welding ground cable directly to the part that will be welded, as close as possible to the weld.
  5. Protect the wiring harness from welding debris and spatter.
  6. Use standard welding practices to weld the materials.

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Parts cataloged across the Perkins 1104D family

33
Part #DescriptionCategory
125562Air Filter - SecondaryAir filter
LLB1114BLeroy SomerAlternator
LLB1114DLeroy SomerAlternator
LLB1114FLeroy SomerAlternator
LLB1114LLeroy SomerAlternator
LLB1114MLeroy SomerAlternator
LLB1514JLeroy SomerAlternator
LLB1514PLeroy SomerAlternator
LLB3114DLeroy SomerAlternator
LLB3114HLeroy SomerAlternator
125552BeltBelt
P532Fuel Injection Pump Solenoid Connector (2 Pin Connector)Connector
P691/J691Electronic Unit Injectors for No. 1 and No. 2 Cylinders (4 Pin Connector)Injector
P692/J692Electronic Unit Injectors for No. 3 and No. 4 Cylinders (4 Pin Connector)Injector
101-4000GasketService part / kit
127-0826BatteryService part / kit
134277T70, T90 & T120 Super Quiet Generator Maintenance ScheduleService part / kit
153-5720BatteryService part / kit
250-0486Oil FilterService part / kit
250-0488Spark PlugService part / kit
8C-3600BatteryService part / kit
8C-3601BatteryService part / kit
8C-3620BeltService part / kit
8C-3627Fuel FilterService part / kit
P100Coolant Temperature Sensor (2 Pin Connector)Sensor
P103Intake Manifold Temperature Sensor (2 Pin Connector)Sensor
P200Intake Manifold Pressure Sensor (3 Pin Connector)Sensor
P201Engine Oil Pressure Sensor (3 Pin Connector)Sensor
P228Fuel Pressure Sensor (3 Pin Connector)Sensor
P401Primary Speed/Timing Sensor (2 Pin Connector)Sensor
P402Secondary Speed/Timing Sensor (2 Pin Connector)Sensor
4133L066PERKINS 1104D-E44T, 1104D-E44TA, 1106D-E66TA THERMOSTATThermostat
P601Wastegate Valve (if equipped) (2 Pin Connector)Wastegate valve

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Aftermarket parts that fit this engine

26

Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.

Filters for this engine

  • Air filter: Donaldson P635903 Donaldson P635979 Wix WA11994

Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.

Also used in

12
  • Claas AXOS 310 — Tractor
  • Claas AXOS 320 — Tractor
  • Claas AXOS 330 — Tractor
  • Claas AXOS 340 — Tractor
  • Manitou MLT 1035 L TURBO LSU — Telehandler
  • Massey Ferguson MF5425 — Tractor
  • Massey Ferguson MF5435 — Tractor
  • Massey Ferguson MF5445 — Tractor
  • Massey Ferguson MF5455 — Tractor
  • Massey Ferguson MF5460 — Tractor
  • Massey Ferguson MF6445 — Tractor
  • Massey Ferguson MF6455 — Tractor

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the oil capacity of the Perkins 1104D?

The Perkins 1104D engine has an oil capacity of 8.4 liters.

What is the displacement of the Perkins 1104D?

The Perkins 1104D has a displacement of 4.399 liters with 4 cylinders.

Which generators use the Perkins 1104D engine?

The Perkins 1104D powers 1 generator set(s), including Perkins 1104D-44T IOPU.

What air filter does the Perkins 1104D use?

The Perkins 1104D uses air filter part numbers Donaldson P635903, Donaldson P635979, Wix WA11994.