Home›Engines›MTU 16V 2000 G43

MTU 16V 2000 G43 Engine

Name: MTU 16V 2000 G43 Engine
Brand: MTU

The MTU 16V 2000 G43 is a 31.84 L 16-cylinder turbocharged and charge air cooled engine rated at 1800 rpm, producing up to 1007 kW. It powers generator sets from SDMO, including the EXEL 1 X 910 UC and X910UC. It holds 92 L (24.3 gal) of oil and 110 L (29.1 gal) of coolant.

Also known as: MTU 16V 2000 G43

Part of the MTU 16V2000 engine family — 31 variants share parts & fitment.

31.84 L

Displacement

Cylinders

1800 rpm

Rated speed

1007 kW

Gross power

On this pageSpecs Generator sets FAQ Service intervals Torque & specs Fluids Fault codes Procedures

Engine specifications

Oil capacity	92.0 L
Coolant capacity	110.0 L
Displacement	31.84 L
Cylinders	16
Aspiration	turbocharged and charge air cooled
Rated speed	1800 rpm
Gross power	1007 kW

Generator sets powered by this engine

SDMO EXEL 1 X 910 UC SDMO X910UC

How to read your MTU engine serial & model number →

Service intervals

Item	Action	Hours	Months	Notes
Engine oil	Change	250 hr		Application group 3B TAL
Coolant cooler	Check	1000 hr	12 mo	Check cooler elements for external contamination
Fuel filter	Replace	500 hr	24 mo	Replace fuel filter or fuel filter element
Valve clearance	Check	1000 hr		Application group 3D and 3B
Air filter	Replace	3000 hr	36 mo
Belt drive	Check	3000 hr	24 mo	Battery-charging generator drive and ventilator drive; replace if necessary
Combustion chambers	Inspect	3000 hr	48 mo	Perform endoscopic examination
Fuel injectors	Replace	3000 hr
Fuel injection pumps	Replace	6000 hr
Engine oil filter	Replace		24 mo	Replace when changing the oil or when interval/years is reached, at the latest
Fuel prefilter	Replace		24 mo	Filter elements must be replaced every 2 years at the latest

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Service specifications

Type	Item	Value	Unit	Condition
Other	Belt tension, battery-charging generator drive, new drive belt	450 -50	N
Other	Belt tension, battery-charging generator drive, used drive belt	350 -50	N
Other	Belt tension, ventilator drive 12/16V, new V-belt	660	N
Other	Belt tension, ventilator drive 12/16V, used V-belt	510	N
Other	Belt tension, ventilator drive 18V, new drive belt	670 -50	N
Other	Belt tension, ventilator drive 18V, used drive belt	570 -50	N
Other	Bore / Stroke	130 / 150	mm
Other	Charge-air heat dissipation, 100% load	260	kW	MTU-Application group 3D (ICFN); 3B = 235, 3A = 185
Other	Combustion air volume flow	1.3	m³/s	MTU-Application group 3D (ICFN); 3A = 1.1
Other	Combustion system	Direct Injection
Other	Compression ratio	14 : 1
Other	Coolant antifreeze content, max. permissible	50	%
Other	Cooling equipment: coolant flow rate (charge-air coolant circuit)	17	m3/h
Other	Cooling equipment: coolant flow rate (engine coolant circuit)	58	m3/h
Other	Cooling equipment: height above engine max. permissible	15.2	m
Other	Cooling pump relief bore permissible coolant discharge (coolant)	up to 10	drops/hour
Other	Cooling pump relief bore permissible oil discharge	up to 5	drops/hour
Other	Cylinder configuration	V - 90°
Other	Dimensions (engine only) height	1580	mm
Other	Dimensions (engine only) length	2100	mm
Other	Dimensions (engine only) width	1775	mm
Other	Direction of rotation	left		viewed from flywheel side
Other	Displacement, total	31.84	Liter
Other	Engine coolant capacity (without cooling equipment)	130	Liter
Other	Engine coolant dissipation, 100% load	445	kW	MTU-Application group 3D (ICFN); 3B = 410, 3A = 340
Other	Engine mass moment of inertia, with standard flywheel	6.089	kgm²
Other	Engine mount setting dimension (a)	55	mm
Other	Engine oil capacity, initial filling (standard oil system), total	102	Liter
Other	Engine surface noise	103	dB(A)	Free-field sound pressure level, 1 m distance; 3A = 101
Other	Engine weight, dry (engine in basic execution)	3150	kg	MTU-Application group 3D (ICFN); 3B/3A = 3180
Other	Engine weight, wet	3410	kg	MTU-Application group 3D (ICFN); identical for 3B/3A
Other	Exhaust noise, unsilenced	115	dB(A)	Free-field sound pressure level, 1 m distance; 3B = 114, 3A = 112
Other	Exhaust volume flow	3.5	m³/s	MTU-Application group 3D (ICFN); 3B = 3.3, 3A = 2.8
Other	Flywheel housing flange	SAE 0
Other	Flywheel interface	18"
Other	Fuel supply flow, max.	7.5	l/min
Other	Heater performance	4	kW
Other	Intercooler coolant capacity	20	Liter
Other	Lube oil consumption (after run-in)	0.5		MTU-Application group 3D (ICFN); identical for 3B/3A
Other	Number of cylinders	16
Other	Number of intercooler	1
Other	Number of turbo chargers	2
Other	Oil pan capacity, dipstick mark max.	92	Liter
Other	Oil pan capacity, dipstick mark min.	69	Liter
Other	Operating method	Four stroke Diesel
Other	Power (ISO 3046)	1007	kW	MTU-Application group 3D (ICFN); 3C (ICXN) = #NV, 3B (ICXN) = 915, 3A (ICXN) = 743
Other	Power available up to - intake air temperature	25 / 40	°C	Reference conditions (standard / power available up to)
Other	Radiation and convection heat, engine	45	kW	identical for 3B/3A
Other	Recommended minimum continuous load	20	%
Other	Site altitude above sea level - reference conditions	100 / 400	m	Reference conditions (standard / power available up to)
Other	Specific fuel consumption (be), 100% CP	207	g/kWh	Tolerance +5% according to ISO 3046/1; MTU-Application group 3D (ICFN); 3B = 209, 3A = 212
Other	Specific fuel consumption (be), 50% CP	215	g/kWh	MTU-Application group 3D (ICFN); 3B = 216, 3A = 224
Other	Specific fuel consumption (be), 75% CP	211	g/kWh	MTU-Application group 3D (ICFN); 3B = 213, 3A = 216
Other	Starter ring-gear teeth no.	118
Other	Starter, power requirement at firing speed	900	A
Other	Starter, power requirement max.	1600	A
Other	Starter, rated power	9.5	kW
Pressure	Charge air pressure before cylinder (Standby 3D, air-cooled, opt. fuel cons.)	2.7 / 2.9 / 2.7 / 3.0 / 3.0	bar ABS	FSP
Pressure	Coolant pump: inlet pressure, max.	1.52	bar
Pressure	Coolant pump: inlet pressure, min.	0.4	bar

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Recommended fluids

Fluid	Grade	Standard	Ambient	Capacity	Notes
Coolant		MTU Fluids and Lubricants Specification (A001061/..)			Coolant antifreeze content max. permissible 50%. Coolant capacity varies by model.
Engine oil		MTU Fluids and Lubricants Specification (A001061/..)			Use only fluids and lubricants which comply with the MTU Fluids and Lubricants Specification. Engine oil capacity varies by model.

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Fault codes

Code	Name	Meaning	Severity	Action
005	L1 T-CHARGE AIR	Charge-air temperature too high (1st limit)	Warning	Reduce power.
006	L2 T-CHARGE AIR	Charge-air temperature too high (2nd limit)	Warning	Reduce power.
009	L1 T-INTERCOOLER	Charge-air coolant temperature too high (1st limit)	Warning	Reduce power.
015	L1 P-LUBE OIL	Lube-oil pressure too low (1st limit)	Warning	Check engine-oil level and top up if required.
016	L2 P-LUBE OIL	Lube-oil pressure too low (2nd limit); automatic engine shutdown	Shutdown	Check engine-oil level and top up; try to re-start; contact Service.
023	L1 COOLANT LEVEL	Engine coolant level too low	Warning	Check coolant level and top up if required.
024	L2 COOLANT LEVEL	Engine coolant level too low	Warning	Check coolant level and top up if required.
030	ENGINE OVERSPEED	Engine overspeed; automatic engine shutdown	Shutdown	Acknowledge alarm; try to re-start; contact Service.
044	L1 LEVEL INTERCOOLER	Charge-air coolant level too low (1st limit)	Warning	Check coolant level and top up if required.
045	L2 LEVEL INTERCOOLER	Charge-air coolant level too low (2nd limit)	Warning	Check coolant level and top up; if fault occurs repeatedly contact Service.
051	L1 T-LUBE OIL	Lube-oil temperature too high (1st limit)	Warning	Reduce power.
052	L2 T-LUBE OIL	Lube-oil temperature too high (2nd limit)	Warning	Reduce power; if fault occurs repeatedly contact Service.
065	L1 P-FUEL	Fuel supply pressure too low (1st limit)	Warning	Check fuel lines for leaks; clean/flush fuel prefilter; replace filter element; if not rectified contact Service.
066	L2 P-FUEL	Fuel supply pressure too low (2nd limit)	Warning	Check fuel lines for leaks; clean/flush fuel prefilter; replace filter element; if not rectified contact Service.
067	L1 T-COOLANT	Coolant temperature too high (1st limit); warning	Warning	Reduce power.
068	L2 T-COOLANT	Coolant temperature too high (2nd limit); automatic engine shutdown	Shutdown	Allow engine to cool down; check coolant cooler and clean contaminated parts; re-start; if repeated contact Service.
069	L1 T-EXTERN 1	Violation of first limit for external temperature channel 1	Warning	Depending on corresponding measuring point read via CAN bus.
070	L2 T-EXTERN 1	Violation of second limit for external temperature channel 1	Warning	Depending on corresponding measuring point read via CAN bus.
071	L1 T-EXTERN 2	Violation of first limit for external temperature channel 2	Warning	Depending on corresponding measuring point read via CAN bus.
072	L2 T-EXTERN 2	Violation of second limit for external temperature channel 2	Warning	Depending on corresponding measuring point read via CAN bus.
073	L1 P-EXTERN 1	Violation of first limit for external pressure channel 1	Warning	Depending on corresponding measuring point read via CAN bus.
074	L2 P-EXTERN 1	Violation of second limit for external pressure channel 1	Warning	Depending on corresponding measuring point read via CAN bus.
075	L1 P-EXTERN 2	Violation of first limit for external pressure channel 2	Warning	Depending on corresponding measuring point read via CAN bus.
076	L2 P-EXTERN 2	Violation of second limit for external pressure channel 2	Warning	Depending on corresponding measuring point read via CAN bus.
077	LIM EXT.COOLANT LEV.	Alarm from external coolant level monitoring	Warning	Depending on corresponding measuring point read via CAN bus.
078	LIM INTERCOOLER LEV.	Alarm from external charge-air coolant level monitoring	Warning	Depending on corresponding measuring point read via CAN bus.
079	L BIN-EXTERN 3	Alarm from external binary channel 3	Warning	Depending on corresponding measuring point read via CAN bus.
080	L BIN-EXTERN 4	Alarm from external binary channel 4	Warning	Depending on corresponding measuring point read via CAN bus.
082	RAIL PRESSURE HIGH	Pressure in HP fuel system exceeds specified value; solenoid valve of HP fuel control block jamming or wiring defective	Warning	Contact Service.
083	RAIL PRESSURE LOW	Pressure in HP fuel system lower than specified value; HP fuel control block defective or system leaking	Warning	Contact Service.
084	RAIL LEAKAGE	HP fuel system leaking, system contains air	Warning	Contact Service.
089	ENGINE SPEED LOW	Engine speed lower than 200 rpm; automatic engine shutdown	Shutdown	Re-start the engine.
090	IDLE SPEED LOW	Idle speed not reached within a specified period; termination of starting procedure	Warning	Note further alarms.
091	RUN UP SPEED LOW	Run-up speed not reached within a specified period; termination of starting procedure	Warning	Note further alarms.
092	START SPEED LOW	Starter speed not reached within a specified period; termination of starting procedure	Warning	Note further alarms.
093	PREHEAT TEMP. LIMIT2	Coolant preheating temperature too low during starting (2nd limit); termination of starting procedure	Warning	Check preheating pump / preheating system.
094	PREHEAT TEMP. LIMIT1	Coolant preheating temperature too low during starting (1st limit)	Warning	Check preheating pump / preheating system.
100	EDM NOT VALID	Check sum error of measuring-point data in EDM	Warning	If fault occurs repeatedly: contact Service.
101	IDM NOT VALID	Check sum error of measuring-point data in IDM	Warning	If fault occurs repeatedly: contact Service.
102	INVALID FUEL CONS. 1	Check sum error of accumulated fuel consumption data in EDM (redundant data record 1)	Warning	If fault occurs repeatedly: contact Service.
103	INVALID FUEL CONS. 2	Check sum error of accumulated fuel consumption data in EDM (redundant data record 2)	Warning	If fault occurs repeatedly: contact Service.
104	OP HOURS NOT VALID	Check sum error of hour meter data in EDM	Warning	If fault occurs repeatedly: contact Service.
106	ERR REC1 NOT VALID	Check sum error of fault memory in EDM (redundant data record 1)	Warning	If fault occurs repeatedly: contact Service.
107	ERR REC2 NOT VALID	Check sum error of fault memory in EDM (redundant data record 2)	Warning	If fault occurs repeatedly: contact Service.
118	L1 SUPPLY VOLT. LOW	Supply voltage too low (1st limit)	Warning	Check ECU supply voltage.
119	L2 SUPPLY VOLT. LOW	Supply voltage too low (2nd limit)	Warning	Check ECU supply voltage.
120	L1 SUPPLY VOLT. HIGH	Supply voltage too high (1st limit)	Warning	Check ECU supply voltage.
121	L2 SUPPLY VOLT. HIGH	Supply voltage too high (2nd limit); automatic engine shutdown	Shutdown	Check ECU supply voltage; if engine was stopped start engine.
122	L1 T-ELECTRONIC	Temperature in ECU housing too high (1st limit)	Warning	Improve engine room ventilation; reduce engine power.
134	18V POS ECU DEFECT	Electronic equipment defective; automatic engine shutdown	Shutdown	Contact Service.
136	15V NEG ECU DEFECT	Electronic equipment defective; automatic engine shutdown	Shutdown	Contact Service.
137	L15V BUFFER TEST	Power supply for pressure sensors defective	Warning	Disconnect connectors X2 and X3 from ECU; if alarm does not disappear contact Service; check wiring.
138	SENSORPOWERDEFECT	Power supply for pressure sensors defective	Warning	Disconnect connectors X2 and X3 from ECU; if alarm does not disappear contact Service; check wiring.
139	L1 TE BUFFER TEST	Internal electronic fault (temperature sensors)	Warning	Contact Service.
140	TE BUF. ECU DEFECT	Internal electronic fault (temperature sensors)	Warning	Contact Service.
142	BANK1 DEFECT	Internal electronic fault; engine does not start	Shutdown	Contact Service.
144	BANK2 DEFECT	Internal electronic fault; engine does not start	Shutdown	Contact Service.
145	16V_GOOD ECU DEFECT	Electronic equipment defective; automatic engine shutdown	Shutdown	Contact Service.
146	L1 AD-TEST1 SUPPLY	A/D-converter supply voltage too low	Warning	Contact Service.
147	AD-TEST1 ECU DEFECT	Electronic equipment defective; automatic engine shutdown	Shutdown	Contact Service.
148	L1 AD-TEST2 SUPPLY	A/D-converter supply voltage too low	Warning	Contact Service.
149	AD-TEST2 ECU DEFECT	Electronic equipment defective; automatic engine shutdown	Shutdown	Contact Service.
150	L1 AD-TEST3 SUPPLY	A/D-converter supply voltage too low	Warning	Contact Service.
170	MI MODULE FAIL	Module in maintenance predictor either defective or missing	Warning	Contact Service.
171	MI NOT ACTIVE	Maintenance predictor no more activated	Warning	Contact Service.
173	MODULE WRITE LIMIT	EEPROM write limit reached	Warning	Contact Service.
180	CAN1 NODE LOST	At least one device not detected on Default CAN bus	Warning	Check wiring (CAN bus); contact Service.
181	CAN2 NODE LOST	At least one device not detected on Redundant CAN bus	Warning	Check wiring (CAN bus); contact Service.
182	CAN WRONG PARAMETERS	Consistency error in CAN parameters	Warning	Contact Service.
183	CAN NO PU-DATA	Error during loading of CAN project design data into ECU	Warning	Contact Service.
184	CAN PU-DATA EE-FAIL	Error during project design data download in EEPROMs	Warning	Contact Service.
185	CAN LESS MAILBOXES	Error during CAN initialization	Warning	Contact Service.
186	CAN1 BUS OFF	Severe fault on Default CAN bus; automatic change-over	Warning	Contact Service.
187	CAN1 ERROR PASSIVE	Light fault on Default CAN bus (e.g. short-time overload)	Warning	(none)
188	CAN2 BUS OFF	Severe fault on Redundant CAN bus; automatic change-over to Default CAN bus	Warning	Contact Service.
189	CAN2 ERROR PASSIVE	Light fault on Redundant CAN bus (e.g. short-time overload)	Warning	(none)
201	SD T-COOLANT	Sensor defect (coolant temperature)	Warning	Check wiring; contact Service.
202	SD T-FUEL	Sensor defect (fuel temperature)	Warning	Check wiring; contact Service.
203	SD T-CHARGE AIR	Sensor defect (charge-air temperature)	Warning	Check wiring; contact Service.
205	SD T-COOLANT INTERC.	Sensor defect (charge-air coolant temperature)	Warning	Check wiring; contact Service.

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Procedures

Battery-charging generator drive - Drive-belt check and adjustment adjustment

Tools: Belt-tension tester

Remove guard cover.
Check belt for contamination by oil, cracks, wear and overheating; replace if defective.
Place belt-tension tester onto drive belt midway between the belt pulleys.
Press button uniformly down until spring disengagement can be heard and felt.
Take off belt-tension tester without changing position of indication arm.
Read off measuring value at intersection of indication arm and 'KG' scale.
Specified belt tension for new drive belt: 450 N -50 N; used drive belt: 350 N -50 N.
If measured value deviates, readjust belt tension.
To adjust: loosen securing screws, tension belt with tensioning nut, tighten securing screw (2) to 40 Nm +/- 4 Nm, tighten securing screw (3).
Install guard cover.

Valve clearance - Check and adjustment adjustment

Tools: Feeler gauge, Torque wrench

Remove cylinder-head cover.
Bar engine until markings are aligned.
Check TDC position of piston in cylinder A1.
Check valve clearance with cold engine: Inlet 0.4 mm, Exhaust 0.6 mm.
Check all valve clearances in two crankshaft positions (firing and overlap TDC for cylinder A1) per diagram.
Use feeler gauge between valve bridge and rocker arm.
If deviation exceeds 0.1 mm, adjust valve clearance.
Loosen locknut and unscrew adjusting screw a few threads.
Insert feeler gauge between valve bridge and rocker arm.
Readjust adjusting screw so feeler gauge just passes through.
Tighten locknut to 50 Nm holding adjusting screw firmly.
Check feeler gauge just passes through between valve bridge and rocker arm.
Remove barring tool, install cylinder-head cover and cover.

Ventilator drive - Drive-belt check and adjustment adjustment

Tools: Belt-tension tester, Torque wrench

Remove guard cover.
Check V-belt for contamination, cracks, wear, chunking and overheating; replace if defective.
Belt-tension check 12/16V: place belt-tension tester midway between pulleys; press button until spring disengagement is heard and felt.
Read off measured value; new V-belt 660 N, used V-belt 510 N.
Belt-tension adjustment 12/16V: loosen securing screws, release locknut, screw in tensioning screw to set specified belt tension, tighten locknut, tighten securing screws to 100 Nm.
Belt-tension check 18V: new drive belt 670 N -50 N, used drive belt 570 N -50 N.
Belt-tension adjustment 18V: loosen securing screws, screw in tensioning screw to tension V-belt, tighten securing screws to 69 Nm.
Install guard cover and tighten screws.

Air filter removal and installation maintenance

Loosen clamp.
Remove air filter and clamp from flange of intake housing.
Verify there are no objects in the flange of the intake housing and clean it.
Place new air filter with clamp onto intake housing.
Tighten clamp.

Cooling pump - Relief bore check maintenance

⚠ Unguarded rotating and moving engine components.

⚠ Engine noise above 85 dB (A).

Check relief bore for oil and water discharge.
Stop engine and disable engine start.
Clean the relief bore with a wire if dirty.
Permissible coolant discharge up to 10 drops/hour; permissible oil discharge up to 5 drops/hour.
If discharge exceeds specified limits, contact Service.

Crankcase breather - oil separator replacement and diaphragm check maintenance

Tools: Torque wrench

Remove cover with O-ring.
Remove filter element from housing.
Insert new filter element into housing observing correct installation position, fit cover with new sealing ring.
Tighten screws of cover to 6 Nm +/- 2 Nm.
Replace filter elements of further oil separators in the same way.
For diaphragm check remove cover, take off spring, seal and diaphragm; check and replace if damaged; install new seal and spring with cover; tighten screws to 6 Nm +/- 2 Nm.

Cylinder-head cover - Removal and installation maintenance

Tools: Torque wrench

On covers with crankcase breather: loosen clamps and slide rubber sleeves onto the pipe.
Remove screws.
Remove cylinder-head cover with gasket from cylinder head.
Clean mating faces.
Check condition of gasket and replace if damaged.
Place covers onto crankcase and tighten screws to 20 Nm.
Slide rubber sleeves onto pipe connection and tighten all clamps.

Engine - Barring manually maintenance

⚠ Unguarded rotating and moving engine components; risk of serious injury / danger to life.

Tools: Barring tool for 12V engines, Barring tool for 16/18V engines

Remove cover from flywheel housing.
Install barring tool on flywheel housing.
Rotate crankshaft in engine direction of rotation; apart from normal compression resistance there should be no abnormal resistance.
If resistance exceeds normal compression resistance, contact Service.
For barring-tool removal follow reverse sequence.

Engine - barring with starting system maintenance

⚠ Unguarded rotating and moving engine components.

Tools: Connector pliers

Disengage bayonet ring-nut of connector X4 with connector pliers and withdraw connector from ECU.
Bar engine in unloaded condition: press START button.
Let crankshaft rotate until oil pressure is indicated.
Engine start is automatically interrupted when specified starting period expires; if necessary re-start after approx. 20 seconds.
Plug connector X4 and secure the bayonet ring by turning clockwise until it latches.

Engine coolant - Draining maintenance

⚠ Coolant is hot and under pressure; risk of injury and scalding.

Provide appropriate container to drain the coolant into.
Switch off preheating unit.
Turn breather valve of filler neck counterclockwise to first stop and allow pressure to escape, then remove.
Draw off precipitated corrosion inhibitor oil from the expansion tank through filler neck.
Open drain cocks or drain plugs and drain coolant at preheating unit, HT coolant pump and crankcase right side.
Drain residual coolant at crankcase left side and oil heat exchanger.
Seal all open drain points.
Set breather valve onto filler neck and close it.

Engine coolant filling maintenance

⚠ Coolant is hot and under pressure; risk of injury and scalding.

⚠ Cold coolant in hot engine can cause thermal stress - fill only into cold engine.

Turn breather valve on coolant expansion tank counterclockwise to first stop and allow pressure to escape.
Continue to turn breather valve counterclockwise and remove.
Fill coolant through filler neck or filling line until coolant level reaches lower edge of cast-in eye or marking plate.
Check proper condition of breather valve and clean sealing faces.
Set breather valve onto filler neck and close it.
Start the engine and operate it at idle speed for some minutes.
Check coolant level and top up if required.

Engine oil change maintenance

⚠ Hot engine oil; risk of injury and scalding.

Provide suitable container to collect the oil.
Draining at drain plug: remove drain plug and drain oil; install drain plug with new sealing ring.
Oil extraction: extract all oil from oil pan using the hand pump.
Replace engine oil filter.
Determine amount of engine oil required for oil change.
Open cover of filler neck; pour oil in up to 'max.' mark at oil dipstick.
Close cover of filler neck.
Check oil level.
After oil change and oil filter replacement, bar engine with starting system.

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Parts cataloged across the MTU 16V2000 family

145

Part #	Description	Category
8699970291	BALL COCK	ball_cock
915011002102	BANJO SCREW	banjo_screw
915047004100	BANJO SCREW	banjo_screw
0009900884	BANJO UNION	banjo_union
0165313283	BAJO-STECKVERBINDER	bayonet_coupling
0165313383	BAJO-STECKVERBINDER	bayonet_coupling
0165313483	BAJO-STECKVERBINDER	bayonet_coupling
0165314083	BAJO-STECKVERBINDER	bayonet_coupling
0165314283	BAJO-STECKVERBINDER	bayonet_coupling
X00035708	BUSHING	bushing
0085313380	KABEL	cable
X0085316180	KABEL	cable
X00E50200111	KABEL FUER REGLER	cable_for_governor
X00E50200119	KABEL FUER REGLER	cable_for_governor
5105302034	KABEL MIT STECKER	cable_w_male_connector
X53605100004	CAMSHAFT GEAR	camshaft_gear
X00E50200003	KASSETTE	cassette
916016006201	CLAMP	clamp
916016006202	CLAMP	clamp
8690920054	COCK	cock
X00041878	COMPUTER ACCESSORIES	computer_accessories
X00E50200176	ANSCHLUSSINTERFACE	connection_interface
X5220382211	CONROD BEARING LOWER HALF	conrod_bearing_lower_half
X00005505	CONTAM INDICATOR	contam_indicator
5105351491	DECKEL	cover
5105384575	DISPLAY F.FAHRSTAND GESCHL	display
5105384575/S0006	DISPLAY F.FAHRSTAND GESCHL	display
X00035411	DRIVER	driver
X00E50201022	CONTROL UNIT ELECTRONIC ADEC F/MONITRG SYS	ecu
X52210100013	EXHAUST TURBOCHARGER	exhaust_turbocharger
0000925005	FILTER ELEMENT	filter_element
X00024059	FOLIE	foil
X00E50201023	FOLIE FUER BILDSCHIRM	foil_for_screen
5220705532	FUEL LINE	fuel_line
X52208600003	FUEL LINE	fuel_line
X52208600004	FUEL LINE	fuel_line
5381420180	GASKET	gasket
8695860571	GASKET KIT	gasket
000000001684	HEX NUT	hex_nut
5220705432	Hose Assy., Fuel Line	hose
X53507700001	HP FUEL LINE HIGH PRESSURE	hp_fuel_line_high_pressure
X53507700002	HP FUEL LINE SINGLE-WALL	hp_fuel_line_single_wall
X00008918	GEHAEUSEOBERTEIL	hsg_upper_elem
0035337089	BEZEICHNUNGSSCHILD	identification_plate
X53507300001	INJECTION PUMP	injection_pump
X53507500006	INJECTOR	injector
X53607500012	INJECTOR	injector
0005353703	LEVEL MONITOR	level_monitor
X00026775	NIVEAUWAECHTER	level_monitor
0005316785	MALE CONNECTOR	male_connector
700461103005	KENNZEICHNUNGSTUELLE	marker_sleeve
700461103023	KENNZEICHNUNGSTUELLE	marker_sleeve
700461203003	KENNZEICHNUNGSTUELLE	marker_sleeve
000908010002	PLUG	oil_filter
0099979382	OIL HOSE	oil_hose
X00008932	GEHAEUSEUNTERTEIL	oil_pan
0000170624	PRESSURE PIPE NECK	other_service
0001596440	CABLE CLAMP DN10	other_service
0001596540	CABLE CLAMP DN17	other_service
0005327256	DC/DC WANDLER	other_service
0015312984	SCHR-STECKVERBINDER	other_service
007603022102	SEALING RING A 22 X 27	other_service
0085311283	FLACH-STECKVERBINDER	other_service
0165310783	BAJO-STECKVERBINDER	other_service
0165310883	BAJO-STECKVERBINDER	other_service
0175318183	BAJO-STECKVERBINDER	other_service
304017008030	SCREW	other_service
5105336736	PLATTE	other_service
5220700232	PRESSURE LINE SINGLE-WALL	other_service
5220702732	FUEL LINE	other_service
5319971132	PLUG	other_service
5355306734	CABLE F/TEST/SERVICE UNIT	other_service
5360780153	PLUG-IN PIPE FOR FUEL LINE	other_service
5360780831	REDUCTION UNION	other_service
5360781468	COLLET	other_service
5369910041	SLOTTED SPRING PIN	other_service
5410100535	COVER	other_service
5410160633	COVER	other_service
5410170171	THRUST SCREW	other_service
5410780535	CLAMP	other_service
5419900301	SCREW	other_service
5419900304	SCREW	other_service
5419970445	SEALING RING	other_service
700325022100	PIPE HALF-CLAMP	other_service
700327015000	GROMMET	other_service
700335013000	BANJO UNION	other_service
700425000169	PLATE	other_service
700425000170	PLATE	other_service
700429018201	NON-RETURN VALVE	other_service
9060170260	SEALING RING	other_service
915001013003	NUT	other_service
915005013004	CONE, SEALING	other_service
916016015200	CLAMP	other_service
M015650/04E	Operating Instructions	other_service
MS15019/02S	Manual de uso y mantenimiento	other_service
X00005812	LINK	other_service
X00022572	FUEL LINE	other_service
X00030090	SCREW-FITTING UNION W. STRAINER INSERT	other_service
X00030408	CRANKCASE	other_service
X00032706	RETAINER	other_service
X00034186	SCREW	other_service
X00042159	DIASYS2.XX;USB-DONGLE+CD;CUSTOM;	other_service
X52208400006	CONNECTING PIECE	other_service
X52208400021	FUEL PIPELINE	other_service
X52208400023	FUEL PIPEWORK	other_service
X53605100001	CAMSHAFT FOR 16V	other_service
XS00E500.00026	ANSCHLUSSADAPTER FUER DIALOGSOFTWARE	other_service
X52203700022	PISTON	piston
X52203700023	PISTON PIN	piston_pin
X00008726	SCHILD	plate
X00023907	SCHILD SELBSTKLEBEND	plate_self_adhesive
X00038985	STECKKARTE	plug_in_board
5275302113	STECKKARTE	pluggin_board
0035352531	DRUCKAUFNEHMER	pressure_sensor
X00042402	FUEL DELIVERY PUMP	pump
X00031325	FEDERELEMENT	resilient_element
0015318702	WIDERSTAND	resistor
8371501973	RETAINER	retainer
8690920059	RETAINER	retainer
X00027511	RETAINER	retainer
X00035286	RETAINER FOR ON-ENGINE SENSOR	retainer_on_engine_sensor
000000003387	SCREW	screw
000931010237	SCREW	screw
304017006065	SCREW	screw
8690920043	SCREW	screw
007603018101	DICHTRING	seal
007603018104	RING, SEALING A18 X 24	seal
700294015004	O-RING	seal
X00032385	CRANKCASE W. SEAL	seal
007603008109	SEALING RING	sealing_ring
5419970545	SEALING RING	sealing_ring
50155	SEALING TAPE	sealing_tape
0005356430	SENSOR, AIR/FUELWATER TEMPERATURE	sensor
5419940037	SNAP RING	snap_ring
0005357433	DREHZAHLAUFNEHMER	speed_sensor
5285330489	SPRING WASHER	spring_washer
200939010006	STUD	stud
X00005804	KLEMME	terminal
8690920024	VACUUM GAUGE	vacuum_gauge
000125006431	WASHER	washer
000125008427	WASHER	washer
000125010524	WASHER	washer
X00021969	WASHER	washer
X00E50700214	KABELBAUM F.SENSOREN AM MOTOR	wiring_harness_for_on_engine_senso
X00025586	KABELBAUM ZUM INJEKTOR	wiring_harness_to_injector

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Also used in

Mtu 16V2000 — Engine

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the oil capacity of the MTU 16V 2000 G43?

The MTU 16V 2000 G43 engine has an oil capacity of 92.0 liters.

What is the displacement of the MTU 16V 2000 G43?

The MTU 16V 2000 G43 has a displacement of 31.84 liters with 16 cylinders.

Which generators use the MTU 16V 2000 G43 engine?

The MTU 16V 2000 G43 powers 2 generator set(s), including SDMO EXEL 1 X 910 UC, SDMO X910UC.