Home›Engines›Mitsubishi S4Q2.Y262SD

Mitsubishi S4Q2.Y262SD Engine

The Mitsubishi S4Q2.Y262SD is a 2.5 L 4-cylinder athmo engine rated at 1800 rpm, producing up to 28.71 kW. It powers generator sets from SDMO, including the T20UC and TM20UC. It holds 6.5 L (1.7 gal) of oil and 5.5 L (1.5 gal) of coolant.

Also known as: MITSUBISHI S4Q2.Y262SD

Part of the Mitsubishi S4Q2 engine family — 10 variants share parts & fitment.

2.5 L
Displacement
4
Cylinders
1800 rpm
Rated speed
28 kW
Gross power

Service parts for the S4Q2.Y262SD

The cheapest captured merchant offer per filter — see the full cross-reference below for every OEM/aftermarket option.

Oil system

1 required

Prices captured from merchant listings; some links are affiliate links. Verify against your serial number before ordering.

Engine specifications

Oil capacity6.5 L
Coolant capacity5.5 L
Displacement2.5 L
Cylinders4
AspirationAthmo
Rated speed1800 rpm
Gross power28 kW

Maintenance schedule

ItemSpecCapacityPart #Interval
Oil filterOil Pressure low idleMD162326M Amazon eBay $28.08

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Parts cataloged across the Mitsubishi S4Q2 family

25
Part #DescriptionCategory
30801032101NEDusty air filter assemblyAir filter
330170365BeltBelt
330910098Coolant GENCOOL (20L)Fluid
330910115Oil GENLUB TDX 20LFluid
330170614Water pump gasketGasket
330170777Exhaust gasketGasket
330170780GasketGasket
330170844GasketGasket
330171211GasketGasket
330171571GasketGasket
330171575GasketGasket
330171484DuritHose
330171692DuritHose
330171942Lower DuritHose
330171943Upper radiator DuritHose
330170272Oil filterOil filter
AEHQ5682-03304C CR Mini Hydraulic ExcavatorService part / kit
AEHQ5683305C CR Mini Hydraulic ExcavatorService part / kit
AEHQ5683-03305C CR Mini Hydraulic ExcavatorService part / kit
AEHQ6016904H Compact Wheel LoaderService part / kit
31810015101NKOil drain pump assemblyPump
330170513Water pumpPump
330170581Oil pumpPump
31101077801NKCoolant temp. and oil pressure sender assemblySensor
330170377ThermostatThermostat

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Aftermarket parts that fit this engine

8
MM435-94101 FridayParts $56.99 32C65-04010 FridayParts $1259.99 32C65-04011 FridayParts $1259.99 32C65-04040 FridayParts $1838.00 092000-4550 FridayParts $1838.00 MM514045 FridayParts $89.99 32c65 FP-XP-0013171

Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.

Filters for this engine

  • Oil filter: Mitsubishi MD162326M Donaldson P502051 Baldwin B161-S

Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.

Also used in

5
  • Caterpillar 304C — Excavator Tracked
  • Caterpillar 305C — Excavator Tracked
  • Orenstein & Koppel 1.48 — Construction Equipment
  • Terex HR18 — Excavator Compact
  • Westerbeke 44B FOUR — Engine

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the oil capacity of the Mitsubishi S4Q2.Y262SD?

The Mitsubishi S4Q2.Y262SD engine has an oil capacity of 6.5 liters.

What is the displacement of the Mitsubishi S4Q2.Y262SD?

The Mitsubishi S4Q2.Y262SD has a displacement of 2.5 liters with 4 cylinders.

Which generators use the Mitsubishi S4Q2.Y262SD engine?

The Mitsubishi S4Q2.Y262SD powers 2 generator set(s), including SDMO T20UC, SDMO TM20UC.

What oil filter does the Mitsubishi S4Q2.Y262SD use?

The Mitsubishi S4Q2.Y262SD uses oil filter part numbers Mitsubishi MD162326M, Donaldson P502051, Baldwin B161-S.