The Mitsubishi MVS4L2-W464ML is a 1.8 L 4-cylinder naturally aspirated engine rated at 1800 rpm, producing up to 16.7 kW. It powers generator sets from Generac, including the MLG 15. It holds 6 L (1.6 gal) of oil.
Maintenance schedule
| Item | Spec | Capacity | Part # | Interval | |
|---|
| Air filter | level of the vacuum draw on the filter minder gauge | | — | | |
| Fuel filter | check fuel level | | — | | |
| Oil filter | check oil level on dipstick and add if needed | | — | | |
| Battery | | | — | | |
| Belt | inspect/adjust belt | | — | | |
| Coolant | | 13.51 gal (L) | — | | |
| Coolant filter | check coolant level in overflow jug and add if needed | | — | | |
| Oil | | 6.0 gal (L) | — | | |
| Spark plug | inspect/adjust valve clearance | | — | | |
Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.
Common questions
What is the oil capacity of the Mitsubishi MVS4L2-W464ML?
The Mitsubishi MVS4L2-W464ML engine has an oil capacity of 6.0 liters.
What is the displacement of the Mitsubishi MVS4L2-W464ML?
The Mitsubishi MVS4L2-W464ML has a displacement of 1.8 liters with 4 cylinders.
Which generators use the Mitsubishi MVS4L2-W464ML engine?
The Mitsubishi MVS4L2-W464ML powers 1 generator set(s), including Generac MLG 15.
What is a common problem with the Mitsubishi MVS4L2-W464ML engine?
A commonly reported issue on generators using the Mitsubishi MVS4L2-W464ML is: Low Oil Pressure Shutdown. Cause: Low oil level, Oil leaking from engine, Oil pressure sender. Fix: Check oil level on dipstick. Add oil if needed. Visually inspect the engine for leaks. Restart unit and verify loss of pressure. Shut down immediately if pressure does not reach 5 psi (34 kPa) within five seconds. See engine operator’s manual to identify corrective action..