Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Engines›Iveco/FPT N67 TM1 6.7L

Iveco/FPT N67 TM1 6.7L Engine

The Iveco/FPT N67 TM1 6.7L is a 6.7 L natural engine rated at 1800 rpm. It powers generator sets from Winco, including the DR100F4 and DR130F4. It holds 18 L (19.0 US qt) of oil and 50 L (13.2 gal) of coolant.

Also known as: FPT N67 TM1 6.7L

Part of the Iveco/FPT N67 engine family — 32 variants share parts & fitment.

6.7 L
Displacement
1800 rpm
Rated speed
18.0 L
Oil capacity
On this pageSpecsGenerator setsFAQTorque & specsFluids

Engine specifications

Oil capacity18 L (19.0 US qt)
Coolant capacity50.0 L
Displacement6.7 L
AspirationNatural
Rated speed1800 rpm

Common problems

8
  • Unit will not crank when power fails
    Cause: Digital genset not in AUTO
  • Engine won't crank
    Cause: Low/dead battery
  • Engine cranks but will not start
    Cause: Improper fuel delivery to the unit
  • Engine will not come up to speed after it starts
    Cause: Insufficient fuel volume getting to the unit — 1. Too small of fuel line
  • Engine starts, then stops and alarm light comes on
    Cause: Engine oil pressure is low
  • ATS will not transfer to Emergency Supply (generator)
    Cause: No AC generator output
  • No output from AC generator
    Cause: Loss of speed signal
  • ATS will not re-transfer to normal power
    Cause: Proper power line not available at line terminals in ATS panel

Compiled from service & troubleshooting documentation across every generator set that uses the Iveco/FPT N67 TM1 6.7L.

Service specifications

2
TypeItemValueUnitCondition
OtherCold starting with preheating-13Fminimum ambient
OtherCold starting without preheating5Fminimum ambient

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Recommended fluids

FluidGradeStandardAmbientCapacityNotes
Engine oil10W 30-25°C to 50°C17.9 QTCold starting: without preheating 5°F (-15°C), with preheating -13°F (-25°C)

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Parts cataloged across the Iveco/FPT N67 family

11
Part #DescriptionCategory
16200-028Air FilterAir filter
UCI274FAlternatorAlternator
UCI274GAlternatorAlternator
16200-013BeltBelt
16200-022OilFluid
16200-019Fuel FilterFuel filter
16200-025Oil FilterOil filter
17.2Oil pan capacity with filterService part / kit
208/240VVoltage optionsService part / kit
277/480VVoltage optionsService part / kit
347/600VVoltage optionsService part / kit

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Common questions

What is the oil capacity of the Iveco/FPT N67 TM1 6.7L?

The Iveco/FPT N67 TM1 6.7L engine has an oil capacity of 18 L (19.0 US qt).

What is the displacement of the Iveco/FPT N67 TM1 6.7L?

The Iveco/FPT N67 TM1 6.7L has a displacement of 6.7 liters.

Which generators use the Iveco/FPT N67 TM1 6.7L engine?

The Iveco/FPT N67 TM1 6.7L powers 2 generator set(s), including Winco DR100F4, Winco DR130F4.

What is a common problem with the Iveco/FPT N67 TM1 6.7L engine?

A commonly reported issue on generators using the Iveco/FPT N67 TM1 6.7L is: Unit will not crank when power fails. Cause: Digital genset not in AUTO.