Home›Engines›Deutz F3M1008F

Deutz F3M1008F Engine

The Deutz F3M1008F is a 1.01 L aspirated engine rated at 1800 rpm. It powers generator sets from MQ Power, including the LT-12.

Also known as: Deutz F3M1008F

1.008 L
Displacement
1800 rpm
Rated speed

Engine specifications

Displacement1.008 L
AspirationAspirated
Rated speed1800 rpm

Generator sets powered by this engine

1
MQ Power LT-12

How to read your Deutz engine serial & model number →

Common problems

3
  • Engine does not start
    Cause: No fuel
    Fix: Refill fuel
  • Lamp will not start
    Cause: Lamp burned out
    Fix: Replace lamp
  • Engine fails to start and start
    Cause: Defective ignition switch
    Fix: Replace ignition switch

Compiled from service & troubleshooting documentation across every generator set that uses the Deutz F3M1008F.

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filterEngine air filter—
Fuel filterDiesel fuel filter—
OilDiesel engine oil—

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Aftermarket parts that fit this engine

1

Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.

Also used in

2
  • Atlas Copco 32DD — Compressor
  • Compair DS20 — Compressor

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the displacement of the Deutz F3M1008F?

The Deutz F3M1008F has a displacement of 1.008 liters.

Which generators use the Deutz F3M1008F engine?

The Deutz F3M1008F powers 1 generator set(s), including MQ Power LT-12.

What is a common problem with the Deutz F3M1008F engine?

A commonly reported issue on generators using the Deutz F3M1008F is: Engine does not start. Cause: No fuel. Fix: Refill fuel.