HomeEnginesCummins/Onan VTA-28-G1

Cummins/Onan VTA-28-G1 Engine

The Cummins/Onan VTA-28-G1 is an engine. It holds 22.3 L (5.9 gal) of oil and 85 L (22.5 gal) of coolant.

Also known as: Cummins VTA-28-G1

Part of the Cummins/Onan VTA-28 engine family — 3 variants share parts & fitment.

22.3 L
Oil capacity

Engine specifications

Oil capacity22.3 L
Coolant capacity85.0 L

Generator sets

No generator set in our catalog cites this exact engine designation yet; its specifications and fault codes are documented here.

How to read your Cummins/Onan engine serial & model number →

Troubleshooting

2

Fault codes

CodeMeaning
SC-1609STOPPING SET AT CONTROL PANEL
SC-1610PERMISSIVE AUTOMATIC START SWITCH

Fault codes and symptom→remedy steps extracted from this engine’s service/owner documentation; verify against the official manual before servicing.

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filter
Fuel filter
Oil filter500 hr
Battery500 hr
Belt
Coolant85.0 litres
Coolant filter
Oil22.3 L
Spark plug

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Parts cataloged across the Cummins/Onan VTA-28 family

10
Part #DescriptionCategory
M-1627BOLT DIAGRAMbattery
M-1761AIR CLEANERScleaner
EXS-1583-3CONTROL HEATERcontrol_heater
CS-1075-1COOLANT FILTERScoolant_filter
CS-1367-2TYPICAL COOLANT HEATERcoolant_heater
ES-1779-1VOLTAGE REGULATOR AND EXCITATION SWITCHexcitation_switch
EXS-1036-1RAIN CAPother_service
M-1808-4TYPICAL INSTALLATIONother_service
M-1759INJECTION PUMPpump
M-1760PRE-HIGH AND HIGH COOLANT TEMPERATURE SENSORsensor

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Common questions

What is the oil capacity of the Cummins/Onan VTA-28-G1?

The Cummins/Onan VTA-28-G1 engine has an oil capacity of 22.3 liters.