The Caterpillar G3516B is a 69 L turbocharged engine rated at 1800 rpm, producing up to 970 kW. It powers generator sets from Caterpillar, including the 3412, G3516PM and LEHX0004-01. It holds 423 L (111.7 gal) of oil and 205 L (54.2 gal) of coolant.
Also known as: Caterpillar G3516B, G3516B
Part of the Caterpillar G3516B engine family — 3 variants share parts & fitment.
| Oil capacity | 423.0 L |
|---|---|
| Coolant capacity | 205.0 L |
| Displacement | 69.0 L |
| Aspiration | Turbocharged |
| Rated speed | 1800 rpm |
| Gross power | 970 kW |
This engine also powers 14 machine(s) on Power Equipment Info.
| Part # | Description | Category |
|---|---|---|
| 7N3229 | Connecting rods | connecting_rod |
| 8N1728 | Connecting rods | connecting_rod |
| DZ114695 | (974C) (3447) (3449) (3451) (3453) (3448) (3452) (974Q) (3450) (3454) (974G) | coolant_filter |
| G3516B | Engine model | engine |
| DZ111166 | (USE WITH DZ113373 974G) (974C) | fuel_filter |
| 1609874CAT | Single Cylinder Liner Gasket Set - 3406/ 3412 0.1 lbs/ 0.04 kgs | gasket |
| DM-3E3305 | GASKET SET, WP OH 3412 | gasket |
| DM-8C4402 | GASKET SET, FUEL SYSTEM 3412 | gasket |
| 3N8449 | IMPELLER | impeller |
| IMP0026 | IMPELLER | impeller |
| 249-0439 | Oxidation Catalyst Assembly - Round | other_service |
| 256-0326 | Oxidation Catalyst Assembly - Round | other_service |
| 256-0331 | Oxidation Catalyst Assembly - Round | other_service |
| 703493 | SHAFT | other_service |
| PEHP3036 | Cat Reman Short and Long Blocks | other_service |
| PEHP3036-01 | Cat Reman Short and Long Blocks | other_service |
| SHA0048 | SHAFT | other_service |
| XQ100 | generator | other_service |
| g00104545 | Illustration 4 | other_service |
| g00107406 | Illustration 1: Safety message for the clutch located on the clutch housing (if equipped). | other_service |
| g00107407 | Illustration 2: Safety message for rotating gears that can cause entanglement of the fingers and hands. | other_service |
| g00294510 | Improper jumper cable connections can cause an explosion resulting in personal injury. | other_service |
| i01359666 | Support the component properly when work beneath the component is performed. | other_service |
| i01372247 | Mounting and Dismounting: Inspect steps, handholds, and work area before mounting the engine. | other_service |
| i01372262 | Illustration 4: Safety message for flammable fluids and hot surfaces. | other_service |
| i01480768 | Do not touch any part of an operating engine. Allow the engine to cool before performing maintenance. | other_service |
| i01658146 | Important Safety Information | other_service |
| i01805780 | Before Starting Engine: Ensure that the engine cannot be started before performing maintenance. | other_service |
| i02345910 | Do not allow unauthorized personnel on the engine or around the engine when the engine is serviced. | other_service |
| 703613 | PUMP ASSY | pump |
| JPR-CT3412 | PUMP ASSY | pump |
| 5N2902 | OIL SEAL | seal |
| 5N6055 | M-SEAL | seal |
| JMK0002 | SEAL KIT | seal |
| MCSSET0009 | M-SEAL | seal |
| RET0020 | OIL SEAL | seal |
| PEHP7069-01 | Reman Water Pump | water_pump |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.
The Caterpillar G3516B engine has an oil capacity of 423.0 liters.
The Caterpillar G3516B has a displacement of 69.0 liters.
The Caterpillar G3516B powers 6 generator set(s), including Caterpillar 3412, Caterpillar G3516B, Caterpillar G3516PM, Caterpillar LEHX0004-01, Caterpillar XQ 2000.