The General Motors Industrial Powertrain Vortec 4.3 L is a 4.3 L 6-cylinder natural aspiration engine rated at 1800 rpm, producing up to 44.8 kW. It powers generator sets from Hipower, Kohler, SDMO and Wincogen, including the HGM 40 T6U, 30-45REZG, 30RZG and 35RZ. It holds 5.7 L (1.5 gal) of oil and 19.7 L (5.2 gal) of coolant.
Also known as: General Motors Industrial Powertrain Vortec 4.3 L
| Oil capacity | 5.7 L |
|---|---|
| Coolant capacity | 19.7 L |
| Displacement | 4.3 L |
| Cylinders | 6 |
| Aspiration | Natural Aspiration |
| Rated speed | 1800 rpm |
| Gross power | 44 kW |
Shared across brands: Hipower, Kohler, SDMO, Wincogen
Compiled from service & troubleshooting documentation across every generator set that uses the General Motors Industrial Powertrain Vortec 4.3 L.
| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Check for dirt or restriction | — | find | ||
| Fuel filter | As recommended by OEM | — | find | ||
| Oil filter | — | find | |||
| Belt | Belt, fan standard | GM16132 | Amazon eBay PartsGeek | ||
| Coolant | 50/50 antifreeze and water mixture, DexCool Long Life type, min 300F boiling point, -34F freezing point | 6.8 | — | ||
| Oil | SAE 10W-30 | 5.7 Qts | — | 150 hr |
Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.
The General Motors Industrial Powertrain Vortec 4.3 L engine has an oil capacity of 5.7 liters.
The General Motors Industrial Powertrain Vortec 4.3 L has a displacement of 4.3 liters with 6 cylinders.
The General Motors Industrial Powertrain Vortec 4.3 L powers 15 generator set(s), including Hipower HGM 40 T6U, Kohler 30-45REZG, Kohler 30RZG, Kohler 35RZ, Kohler 38RCL.
The General Motors Industrial Powertrain Vortec 4.3 L oil change interval is every 150 hours.
A commonly reported issue on generators using the General Motors Industrial Powertrain Vortec 4.3 L is: Gas fuel leaks. Fix: Check the LPG vapor or natural gas fuel system for leakage by using a soap and water solution with the fuel system test pressurized to 6--8 ounces per square inch (10--14 inches water column). Do not operate the generator set in the presence of fuel leaks, fuel accumulation, or sparks..