The Kubota V1305-B is a 1.33 L 4-cylinder engine rated at 1800 rpm. It powers generator sets from Cummins/Onan, including the HDKA. It holds 4.7 L (1.2 gal) of oil and 4.7 L (1.2 gal) of coolant.
Part of the Kubota V1305 engine family — 2 variants share parts & fitment.
| Oil capacity | 4.7 L |
|---|---|
| Coolant capacity | 4.7 L |
| Displacement | 1.335 L |
| Cylinders | 4 |
| Rated speed | 1800 rpm |
| Part # | Description | Category |
|---|---|---|
| 07916-34041 | Auxilary Socket for Fixing Crankshaft Sleeve | auxiliary_socket_for_fixing_crankshaft_sleeve |
| 511-0201 | V-Belt | belt |
| 07909-31661 | Connecting Rod Alignment Tool | connecting_rod_alignment_tool |
| W1062553 | Connecting Rod Small End Bushing Tool | connecting_rod_small_end_bushing_tool |
| 185-7055 | Cruise Kit | cruise_kit |
| 07916-32011 | Flywheel Puller | flywheel_puller |
| 149-2106 | Fuel Filter | fuel_filter |
| 155-3147 | Water Separator with Resonator (WL & RES) | fuel_filter |
| 300-1500 | Fuel Filter | fuel_filter |
| GL9000 | Fuel filter cartridge or element | fuel_filter |
| 149-2289 | Glow Plug MDKAL/A/B (12 Volt) | glow_plug |
| 155-2033 | Stainless Steel Exhaust Elbow, 90 degrees, 2 inch OD | hose |
| 503-1353 | Wet Exhaust Hose | hose |
| W1040289 | Idle Gear Bushing Replacing Tool | idle_gear_bushing_replacing_tool |
| 132-0415 | Pump Impeller | impeller |
| W10252400 | Injection Pump Pressure Tester | injection_pump_pressure_tester |
| 122-0810 | Oil Filter MDKAL/A/B | oil_filter |
| 324-1491 | Oil Filter | oil_filter |
| 07916-32032 | Oil Pressure Tester | oil_pressure_tester |
| 100-3459-01 | Engine Assy, Replacement (12V) | other_service |
| 100-3459-02 | Engine Assy, Replacement (24V) | other_service |
| 155-2030 | Waterlift Muffler (WL) | other_service |
| 185-5523 | Crankcase Breather | other_service |
| 185-7245 | Block, Cylinder | other_service |
| 405-5253 | Sound Shield Kit | other_service |
| W1046346 | Brush length (Stretch out of the Holder) | other_service |
| 07909-30241 | Plastigage | plastigage |
| 324-1542 | Fuel Injection Pump | pump |
| 612-6673 | Water Pump | pump |
| 07909-31371 | Red Check | red_check |
| 07916-09032 | Special Use Puller Set | special_use_puller_set |
| 323-1544 | Thermostat | thermostat |
| 07909-33102 | Valve Seat Cutter | valve_seat_cutter |
| 130-4434 | Zinc Pencil | zinc_anode |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.
The Kubota V1305-B engine has an oil capacity of 4.7 liters.
The Kubota V1305-B has a displacement of 1.335 liters with 4 cylinders.
The Kubota V1305-B powers 1 generator set(s), including Cummins/Onan HDKA.