The Caterpillar XT8000 is a 13 L engine rated at 3600 rpm, producing up to 8 kW. It powers generator sets from Caterpillar. It holds 1 L (0.3 gal) of oil.
Also known as: Caterpillar XT8000
| Oil capacity | 1.0 L |
|---|---|
| Displacement | 13.0 L |
| Rated speed | 3600 rpm |
| Gross power | 8 kW |
| Code | Meaning |
|---|---|
| 2 | TPS Failure |
| 3 | Cylinder Temp. Failure |
| 4 | Air Temp. Failure |
| 5 | System Voltage Low |
| 6 | System Voltage High |
| 7 | Cylinder High Temp. |
| 8 | Barometric Pressure Sensor Failure |
| 9 | Oil Pressure Anomaly |
| 11 | Fuel Injector Failure |
| 13 | Fuel Pump Failure |
| 15 | Ignition Failure |
| 17 | ECU Internal Failure |
| 18 | Crankshaft Position Sensor Failure |
| 19 | ECU Reset |
| 22 | Engine Overspeed Failure |
| 24 | Load Stability Sensor Failure |
| 27 | Stepper Motor Stuck |
| 28 | Engine Starting Failure |
| Symptom | Cause | Remedy |
|---|---|---|
| Engine shuts down | Low oil pressure drops below specifications | Check engine oil level. The engine will not run if the oil is below proper level. |
Fault codes and symptom→remedy steps extracted from this engine’s service/owner documentation; verify against the official manual before servicing.
The Caterpillar XT8000 engine has an oil capacity of 1.0 liters.
The Caterpillar XT8000 has a displacement of 13.0 liters.
The Caterpillar XT8000 powers 1 generator set(s), including Caterpillar XT8000.