Perkins 9.3L Engine Engine
The Perkins 9.3L is a 9.3 L engine. It powers generator sets from Generac, including the MDE330.
Also known as: Perkins 9.3L
Generator sets powered by this engine
1Common problems
4- Shutdown indicator LED is illuminated.
Fix: Resolve shutdown condition. - Lug Door Open indicator LED is illuminated.
Cause: Lug-box door is open.
Fix: Close lug-box door. If condition remains unresolved, inspect lug-box door safety switch for proper operation. - Low Load indicator LED is illuminated.
Cause: Genset has operated at less than 30% capacity for more than 15 minutes.
Fix: Increase electrical load. If unable to operate genset at more than 30% load, use a smaller generator. - Emergency Stop indicator LED is illuminated.
Cause: Emergency Stop switch is active (pushed in).
Fix: Deactivate (pull out) Emergency Stop switch.
Compiled from service & troubleshooting documentation across every generator set that uses the Perkins 9.3L.
Common questions
What is the displacement of the Perkins 9.3L?
The Perkins 9.3L has a displacement of 9.3 liters.
Which generators use the Perkins 9.3L engine?
The Perkins 9.3L powers 1 generator set(s), including Generac MDE330.
What is a common problem with the Perkins 9.3L engine?
A commonly reported issue on generators using the Perkins 9.3L is: Shutdown indicator LED is illuminated.. Fix: Resolve shutdown condition..