The John Deere 4045TF120 is a 4.48 L 4-cylinder turbo engine rated at 1800 rpm, producing up to 79 kW. It powers generator sets from John Deere, Kohler and SDMO, including the 60REOZJ, J 66 K and J 77 K. It holds 13.5 L (3.6 gal) of oil and 23.6 L (6.2 gal) of coolant.
Also known as: 4045 TF 120, John Deere 4045TF120
Part of the John Deere 4045 engine family — 67 variants share parts & fitment.
The cheapest captured merchant offer per filter — see the full cross-reference below for every OEM/aftermarket option.
Prices captured from merchant listings; some links are affiliate links. Verify against your serial number before ordering.
| Oil capacity | 13.5 L |
|---|---|
| Coolant capacity | 23.6 L |
| Displacement | 4.48 L |
| Cylinders | 4 |
| Aspiration | Turbo |
| Rated speed | 1800 rpm |
| Gross power | 79 kW |
Shared across brands: John Deere, Kohler, SDMO
This engine also powers 1 machine(s) on Power Equipment Info.
| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry type air filter | — | |||
| Fuel filter | Fuel System | — | |||
| Oil filter | Oil Pressure low idle | — | |||
| Battery | 12 V battery, rack and cable | — | |||
| Belt | Skid and vibration isolators | — | |||
| Coolant | Coolant System | 23.6 L | — | ||
| Spark plug | Charge alternator 12 V | — |
Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.
Step-by-step procedures compiled from the John Deere service manual for this engine.
| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| Engine Oil and Oil Filter | Change | 250 hr | 6 mo | First service — First change before 100 hours maximum of break-in operation |
| Engine oil and filter | Change | 100 hr | First service — First service: change at maximum 100 hours of break-in operation | |
| Battery | Check | 250 hr | 6 mo | Service battery |
| Battery | Other | 250 hr | 6 mo | Service battery |
| Engine Mounts | Check | 250 hr | 6 mo | |
| Fire Extinguisher | Other | 250 hr | 250 Hour/6 Month; also inspect once a month | |
| Fire extinguisher | Check | 250 hr | 6 mo | Standard industrial engines; at least once a month |
| Manual Belt Tensioner and Belt Wear | Check | 250 hr | 6 mo | |
| Air Intake Hoses, Connections, & System | Check | 500 hr | 12 mo | |
| Automatic Belt Tensioner and Belt Wear | Check | 500 hr | 12 mo | |
| Coolant solution analysis - add SCAs as required | Test | 500 hr | 12 mo | Test every 500 hours or 12 months |
| Cooling System | Check | 500 hr | 12 mo | |
| Cooling System | Test | 500 hr | 12 mo | Pressure test cooling system |
| Crankcase Vent Tube | Clean | 500 hr | 12 mo | Clean more often in dusty conditions |
| Engine Electrical Ground Connection | Check | 500 hr | 12 mo | |
| Engine speeds | Check | 500 hr | 12 mo | |
| Fuel Filter Element | Replace | 500 hr | 12 mo | Bleed fuel system |
| Single or dual fuel filter elements | Replace | 500 hr | 12 mo | |
| Cooling System | Other | 2000 hr | 24 mo | Flush; with COOL-GARD extend to 3000 hours/36 months, or 5000 hours/60 months if tested annually and SCAs replenished |
| Cooling system | Drain | 2000 hr | 24 mo | Flush/refill; with COOL-GARD extend to 3000 hours or 36 months; to 5000 hours or 60 months if tested annually and SCAs replenished |
| Crankshaft vibration damper (6.8 L engines) | Check | 2000 hr | 24 mo | Replace every 4500 hours or 60 months, whichever occurs first |
| Engine valve clearance | Adjust | 2000 hr | 24 mo | Check and adjust |
| Thermostats | Test | 2000 hr | 24 mo | |
| Variable speed (droop) (generator sets) | Adjust | 2000 hr | 24 mo | Generator (standby) applications |
| Engine coolant | Test | 12 mo | Test the coolant solution at intervals of 12 months or less and whenever excessive coolant is lost | |
| Supplemental coolant additive | Check | 12 mo | Replenish additives between drain intervals by adding supplemental coolant additive every 12 months or as determined by coolant testing | |
| Vibration damper | Replace | 4500 hr | 60 mo | Replace every five years or 4500 hours, whichever occurs first |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Clearance | Air Cleaner Neck to Engine Intake—Overlap | 38 mm (1.5 in) | mm | |
| Clearance | Assembled Rod Bearing—ID | 77.876—77.927 | mm (3.0659—3.0679 in.) | |
| Clearance | Camshaft Follower Bore in Block—ID | 31.70—31.75 | mm (1.248—1.250 in.) | |
| Clearance | Camshaft Follower-to-Bore—Clearance | 0.06—0.13 | mm (0.002—0.005 in.) | |
| Clearance | Camshaft Follower—OD | 31.61—31.64 | mm (1.245—1.246 in.) | |
| Clearance | Connecting Rod Bearing-to-Journal (New Parts)—Oil Clearance; wear limit 0.152 mm (0.0060 in.) | 0.050—0.127 | mm (0.0020—0.0050 in.) | |
| Clearance | Connecting Rod Bore (Without Bearing Inserts)—ID | 82.677—82.703 | mm (3.2550—3.2560 in.) | |
| Clearance | Connecting Rod Bore—Maximum Permissible Out-of-Round | 0.038 | mm (0.0015 in.) | |
| Clearance | Crankshaft—End Play | 0.029—0.357 | mm (0.001—0.014 in.) | |
| Clearance | Cylinder Block Main Bearing Bore—ID | 84.455—84.481 | mm (3.3250—3.3260 in.) | |
| Clearance | Cylinder Head Flatness—Maximum Acceptable Out-of-Flat for Entire Length or Width | 0.08 | mm (0.003 in.) | |
| Clearance | Cylinder Head Flatness—Maximum Acceptable Out-of-Flat for Every 150 mm (5.90 in.) | 0.03 | mm (0.001 in.) | |
| Clearance | Cylinder Liner—Height above Block | 0.030—0.100 | mm (0.001—0.004 in.) | |
| Clearance | Cylinder Liner—ID | 106.48—106.52 | mm (4.192—4.194 in.) | |
| Clearance | Cylinder Liner—Maximum Taper | 0.05 | mm (0.002 in.) | |
| Clearance | Exhaust Valve Clearance For Adjusting (Rocker Arm-to-Valve Tip) | 0.46 mm (0.018 in.) | mm | engine COLD |
| Clearance | Exhaust Valve Clearance For Checking (Rocker Arm-to-Valve Tip) | 0.41—0.48 mm (0.016—0.019 in.) | mm | engine COLD |
| Clearance | Exhaust Valve Guide-to-Valve Stem (New) Clearance (four-valve) | 0.025—0.077 | mm (0.0010—0.0030 in.) | |
| Clearance | Exhaust Valve—Recess in Cylinder Head (four-valve); wear limit 1.81 mm (0.071 in.) | 0.81—1.31 | mm (0.032—0.052 in.) | |
| Clearance | Exhaust Valve—Recess in Cylinder Head (two-valve); wear limit 2.26 mm (0.089 in.) | 1.22—1.72 | mm (0.048—0.068 in.) | |
| Clearance | Fuel Supply Pump Push Rod Bore in Block—ID | 10.00—10.05 | mm (0.3937—0.3957 in.) | |
| Clearance | Fuel Supply Pump Push Rod—OD | 9.891—9.917 | mm (0.3894—0.3904 in.) | |
| Clearance | Fuel injection nozzle tip orifice ID | 0.27 | mm (0.0106 in.) | Naturally aspirated engines |
| Clearance | Fuel injection nozzle tip orifice ID | 0.29 | mm (0.0116 in.) | Turbocharged engines |
| Clearance | Fuel injection nozzle valve needle lift (based on zero lift) | 3/4 Turn Counterclockwise | turn | Conventional nozzle |
| Clearance | Intake Valve Clearance For Adjusting (Rocker Arm-to-Valve Tip) | 0.36 mm (0.014 in.) | mm | engine COLD |
| Clearance | Intake Valve Clearance For Checking (Rocker Arm-to-Valve Tip) | 0.31—0.38 mm (0.012—0.015 in.) | mm | engine COLD |
| Clearance | Intake Valve Guide-to-Valve Stem (New) Clearance (four-valve) | 0.012—0.064 | mm (0.0005—0.0025 in.) | |
| Clearance | Intake Valves—Recess in Cylinder Head (four-valve); wear limit 1.77 mm (0.070 in.) | 0.77—1.27 | mm (0.030—0.050 in.) | |
| Clearance | Intake Valves—Recess in Cylinder Head (two-valve); wear limit 1.63 mm (0.064 in.) | 0.61—1.11 | mm (0.024—0.044 in.) | |
| Clearance | Intake and Exhaust Valve Guide-to-Valve Stem Wear Limit (four-valve) | 0.15 | mm (0.0059 in.) | |
| Clearance | Intake and Exhaust Valves—Maximum Variation for a Pair of Valves (Per Cylinder) | 0.3 | mm (0.012 in.) | |
| Clearance | Main Bearing Bore Centerline-to-Cylinder Block Top Deck—Distance | 337.896—337.972 | mm (13.3029—13.3059 in.) | |
| Clearance | Maximum Permissible Height Difference at Nearest Point of Two Adjacent Liners, or Within a Single Liner | 0.05 | mm (0.002 in.) | |
| Clearance | Piston Pin-to-Bushing—Oil Clearance; wear limit 0.102 mm (0.0040 in.) | 0.020—0.056 | mm (0.0008—0.0022 in.) | |
| Clearance | Piston Rings 4045DF, TF150 and 6068DF, TF150 No. 1 Compression—End Gap | 0.33—0.58 | mm (0.013—0.023 in.) | |
| Clearance | Piston Rings 4045TF250 and 6068TF250 No. 2 Compression—End Gap | 0.75—1.00 | mm (0.030—0.039 in.) | |
| Clearance | Piston-to-Liner Clearance at Bottom of Piston Skirt (Naturally Aspirated Engines) | 0.08—0.14 | mm (0.003—0.005 in.) | |
| Clearance | Piston-to-Liner Clearance at Bottom of Piston Skirt (Turbocharged Engines) | 0.08—0.15 | mm (0.003—0.006 in.) | |
| Clearance | Rocker Arm Bore—ID (four-valve); wear limit 20.16 mm (0.794 in.) | 20.065—20.115 | mm (0.790—0.792 in.) | |
| Clearance | Rocker Arm Bore—ID (two-valve); wear limit 20.17 mm (0.794 in.) | 20.07—20.12 | mm (0.790—0.792 in.) | |
| Clearance | Rocker Arm Shaft—OD (four-valve); wear limit 19.91 mm (0.784 in.) | 19.962—20.038 | mm (0.786—0.789 in.) | |
| Clearance | Rocker Arm Shaft—OD (two-valve); wear limit 19.94 mm (0.785 in.) | 19.99—20.02 | mm (0.787—0.788 in.) | |
| Clearance | Valve Bridge—Pocket-to-Pocket Variation (Maximum) | 0.1 | mm (0.004 in.) | |
| Clearance | Valve Guide-to-Valve Stem (New) Clearance (two-valve); wear limit 0.15 mm (0.006 in.) | 0.05—0.10 | mm (0.002—0.004 in.) | |
| Clearance | Valve lift | 7/8 | turn | RSN nozzle, Tier II certified engines |
| Clearance | Vibration Damper—Maximum Radial Runout | 1.50 mm (0.060 in.) | mm | engine at operating temperature |
| Clearance | Vibration damper maximum radial runout | 1.50 | mm | engine at operating temperature |
| Gap | Magnetic pick-up probe air gap to flywheel face | 0.64 | mm (0.025 in.) | |
| Gap | Valve Face—Maximum Runout (Intake and Exhaust) | 0.038 | mm (0.0015 in.) | |
| Other | 10 in. weld flange bolt circle diameter B | 361.95 | mm (14.25 in.) | |
| Other | 10 in. weld flange outside diameter C | 406.4 | mm (16.0 in.) | |
| Other | 10 in. weld flange quantity of bolts / bolt hole diameter D | 12, 25.40 | mm (1.00 in.) | |
| Other | 12 in. weld flange bolt circle diameter B | 431.80 | mm (17.00 in.) | |
| Other | 12 in. weld flange outside diameter C | 482.6 | mm (19.0 in.) | |
| Other | 12 in. weld flange quantity of bolts / bolt hole diameter D | 12, 25.40 | mm (1.00 in.) | |
| Other | 14 in. weld flange bolt circle diameter B | 476.25 | mm (18.75 in.) | |
| Other | 14 in. weld flange outside diameter C | 533.4 | mm (21.0 in.) | |
| Other | 14 in. weld flange quantity of bolts / bolt hole diameter D | 12, 28.58 | mm (1.13 in.) | |
| Other | 16 in. weld flange bolt circle diameter B | 539.75 | mm (21.25 in.) |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Coolant | Ethylene glycol base coolant | ASTM D6210 | Freeze protection: 40%=-24°C (-12°F); 50%=-37°C (-34°F); 60%=-52°C (-62°F) | ||
| Coolant | John Deere COOL-GARD II / COOL-GARD II PG pre-mix | ASTM D6210 | Or concentrate in 40—60% mixture with quality water. Do not use less than 40% or greater than 60% concentrate. | ||
| Coolant | John Deere COOL-GARD Prediluted Coolant (50% ethylene glycol or 55% propylene glycol) | ASTM D6210 prediluted/concentrate; ASTM D4985 requires initial SCA charge | System filled for freeze protection to -37°C (-34°F). Do not use coolant-water mixture greater than 60% glycol. Do not mix ethylene glycol and propylene glycol base coolants. | ||
| Coolant | John Deere COOL-GARD Prediluted Coolant (preferred); John Deere COOL-GARD Coolant Concentrate 40-60% mixture with quality water | ASTM D5345 (prediluted) / ASTM D4985 (concentrate) | 50% ethylene glycol provides freeze protection to -37°C (-34°F); 40% to -24°C (-12°F); 60% to -52°C (-62°F). Do not exceed 60%. | ||
| Engine oil | John Deere ENGINE BREAK-IN OIL | Alternate: API CE, CD, CC or ACEA E2, E1 (first 100 hours) | New/rebuilt engines filled at factory with break-in oil. Do not exceed 100 hours with break-in oil. | ||
| Engine oil | John Deere PLUS-50 (preferred) | ACEA E5, ACEA E4; also John Deere TORQ-GARD SUPREME, API CI-4, CH-4, CG-4, CF-4, ACEA E3, E2 (Non-Certified and Tier 1 Certified Engines) | Multi-viscosity diesel engine oils are preferred. If oils meeting API CG-4, API CF-4, or ACEA E2 are used, reduce service interval by 50%. | ||
| Engine oil | John Deere PLUS-50 (preferred); John Deere TORQ-GARD SUPREME (also recommended) | API CI-4 / CH-4 / CG-4 / CF-4; ACEA E5 / E4 / E3 / E2 | Multi-viscosity diesel engine oils preferred. If fuel sulfur >0.5% (5000 ppm), reduce service interval by 50%. During first 100 hours of new/overhauled engine use John Deere ENGINE BREAK-IN OIL or API CD/CC or ACEA E1. | ||
| Engine oil | SAE 10W-30 (if John Deere Break-In oil not available) | API CE, CD, CC; ACEA E2 or E1 | Break-in oil; change oil and filter at maximum 100 hours. Do not use Plus-50 II or CJ-4/CI-4/CH-4 etc. for initial break-in. | ||
| Engine oil | SAE 15W-40, SAE 10W-40, SAE 10W-30, SAE 5W-30, SAE 0W-40, SAE 30, SAE 40 | John Deere Plus-50 II (preferred), Plus-50, Torq-Gard; API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4; ACEA E9, E7, E6, E5, E4, E3, E2 | Use oil viscosity based on expected air temperature range between oil changes. Reduce service interval by 50% if API CG-4, API CF-4 or ACEA E2 oils used. | ||
| Fuel | EN 590 or ASTM D975 | Cetane number 40 minimum (greater than 50 preferred, especially below -20°C (-4°F) or above 1500 m (5000 ft)). Cold Filter Plugging Point below expected low temperature or Cloud Point at least 5°C (9°F) below expected low temperature. Fuel lubricity should pass minimum 3100 gram load level (BOCLE scuffing test) / ASTM D6078 or max scar diameter 0.45 mm ASTM D6079 / ISO 12156-1. Sulfur content should not exceed 0.5% (less than 0.05% preferred); DO NOT use fuel with sulfur content greater than 1.0%. Do not mix used engine oil with diesel fuel. | |||
| Fuel | #2 Diesel | Recommended fuel | |||
| Fuel | 5% blend (B5) | ASTM D6751, EN 14214, or equivalent | Bio-diesel maximum allowable concentration is a 5% blend (B5) in petroleum diesel fuel. Check engine oil level daily when air temperature is -10°C (14°F) or lower. Raw pressed vegetable oils are NOT acceptable at any concentration. | ||
| Fuel | Bio-diesel fuel | ASTM D6751, EN 14214 or equivalent; up to 5% blend (B5) | Raw pressed vegetable oils are NOT acceptable. Check engine oil level daily when air temperature is -10°C (14°F) or lower. | ||
| Fuel | Diesel fuel | EN 590 or ASTM D975; Cetane number 40 minimum (greater than 50 preferred) for Non-Certified, Tier I and Tier 2/Stage II engines | Sulfur content should not exceed 0.5%; DO NOT use diesel fuel with sulfur content greater than 1.0%. Fuel lubricity minimum 3100 gram load (BOCLE). | ||
| Fuel | Diesel fuel per EN 590 or ASTM D975 | EN 590 / ASTM D975 | Cetane number 40 minimum, greater than 47 preferred below -20°C (-4°F) or above 1675 m (5500 ft). Max sulfur 10000 mg/kg (10000 ppm). | ||
| Fuel | Grade No. 1-D fuel usable below 5°C (40°F); Grade No. 2-D otherwise | EN 590 or ASTM D975 | Cetane number 45 minimum (>50 preferred). Lubricity min load 3100 grams (ASTM D6078) or max scar diameter 0.45 mm (ASTM D6079). Sulfur <0.05% (500 ppm) preferred; DO NOT use sulfur >1.0%. Bio-diesel per ASTM PS121 or DIN 51606, up to 5% blend. | ||
| Fuel | Winter grade fuel (No. 1-D in North America) | below 0°C | Use when temperatures fall below 0°C (32°F) | ||
| Grease | John Deere SD POLYUREA GREASE (preferred) | NLGI Performance Classification GC-LB; also John Deere HD LITHIUM COMPLEX GREASE, HD WATER RESISTANT GREASE, GREASE-GARD | Consult grease supplier before mixing different types of grease. | ||
| Grease | John Deere SD POLYUREA GREASE (preferred); HD MOLY GREASE, HD LITHIUM COMPLEX GREASE, HD WATER RESISTANT GREASE, GREASE-GARD (also recommended) | NLGI Performance Classification GC-LB | Some grease thickener types are not compatible; consult supplier before mixing. | ||
| Other | John Deere COOLANT CONDITIONER / Liquid Coolant Conditioner (supplemental coolant additive) | Replenish between drain intervals every 12 months or as determined by coolant testing; premix 3% when precharging. DO NOT add SCA when drained and refilled with COOL-GARD. |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Code | Name | Meaning | Severity | Action |
|---|---|---|---|---|
| 1 | Fallo presión de aceite | LED rojo (R) de visualización | Shutdown | |
| 2 | Fallo temperatura de agua | LED rojo (R) de visualización | Shutdown | |
| 3 | Fallo no arranque | LED rojo (R) de visualización | Shutdown | |
| 4 | Fallo sobrevelocidad | LED rojo (R) de visualización | Shutdown | |
| 5 | Grupo listo para suministrar | LED verde (V) de visualización | Info | |
| 6 | Fallo alternador de carga | LED rojo (R) de visualización | Shutdown | |
| 7 | Alarma general | LED amarillo (A) de visualización | Warning | |
| 8 | Fallo general | LED rojo (R) de visualización | Shutdown |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
⚠ Do not manually bottom the valve with excessive force; bending of the valve may result.
Tools: JDG949 Nozzle Wrench, JDG1515-2 Pressure Adjustment Screw Lock Nut Tool, JDG1522 Pressure Adjustment Screw Tool, JDG1521 Spring Chamber Cap Wrench
⚠ Stop engine prior to making timing adjustments; injection pump can seize if adjustment is made with engine running.
Tools: JT07158 (FKM10429A) TIME TRAC Kit, JT07177 Clamp-On Transducer, JT07172 Transducer Cable, JDG793 or JDG821 Magnetic Pick-Up Adapter, JDE81-4 or JDG1571 Timing Pin
⚠ ALWAYS STOP ENGINE before making adjustments.
⚠ Bumper spring screw should not be used by itself to change engine speed more than 50 rpm.
Tools: Tachometer
⚠ Valve clearance MUST BE checked and adjusted with engine COLD.
⚠ To prevent accidental starting, always disconnect NEGATIVE (—) battery terminal.
Tools: JDE83 or JD81-1 Flywheel Turning Tool, JDG1571 or JDE81-4 Timing Pin, Feeler gauge, JDG966 Crankshaft Front/Rear Rotation Adapter
⚠ Adjust with engine COLD
⚠ Replace valves, seats, springs and retainers in pairs; also replace bridge
Tools: JDE83 Flywheel Turning Tool, JDG1571 Timing Pin, Feeler gauge
⚠ Valve clearance MUST be checked and adjusted with engine COLD
⚠ Disconnect NEGATIVE battery terminal to prevent accidental starting
Tools: JDE83 or JDE81-11 Flywheel Turning Tool, JDG1571 or JDE81-4 Timing Pin, Feeler gauge
⚠ Do not pry against alternator rear frame.
Tools: JDG1341 Belt Tension Gauge
Tools: JDG1520 Belt Tension Tool, Torque wrench
⚠ After checks are completed, return cold start circuits to original configuration to ensure proper injection pump timing and conformance to emission control standards.
Tools: JT07158 (FKM10429A) TIME TRAC Kit, Jumper wire
⚠ Measure at 0.00 mm clearance and with engine COLD
Tools: JDG1571 or JDE81-4 Timing Pin, Flywheel turning tool, Dial indicator
⚠ Explosive release of fluids from pressurized cooling system can cause serious burns. Only remove filler cap when cool enough to touch with bare hands.
Tools: D05104ST Tester
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Voltage | Phase | Connection | Leads | Notes |
|---|---|---|---|---|
| 12 lead, reconnectable | 12 | Broad-range reconnectability; 4V7 is 4 lead |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Part # | Description | Category |
|---|---|---|
| 100-025 | Air Filter | Air filter |
| 25-1476 | Air Filter Minders | Air filter |
| 25-1483 | Primary Air Cleaners | Air filter |
| 253108 | Element, air cleaner | Air filter |
| 301315 | Air Filter Element for Compressor | Air filter |
| DZi05100 | CRANKCASE VENT SYSTEM OCV FILTER | Air filter |
| F1000000001 | Air Filter | Air filter |
| G030070 | Air Cleaner Element (Engine) Primary | Air filter |
| G030071 | Air Cleaner Element (Engine) Secondary | Air filter |
| G030073 | Air Cleaner Element (Engine) Primary | Air filter |
| G030074 | Air Cleaner Element (Engine) Secondary | Air filter |
| G030077 | Air Cleaner Element (Engine) Primary | Air filter |
| G030078 | Air Cleaner Element (Engine) Secondary | Air filter |
| G30070 | Air Cleaner Element (Engine) Primary | Air filter |
| DZ123153 | ALTERNATOR | Alternator |
| RE509080 | ALTERNATOR (12V, DENSO) | Alternator |
| RE533516 | ALTERNATOR | Alternator |
| RE533653 | ALTERNATOR | Alternator |
| RE533654 | ALTERNATOR | Alternator |
| RE537146 | ALTERNATOR (28V, 50A) (3142) | Alternator |
| RE537508 | ALTERNATOR | Alternator |
| RE555751 | ALTERNATOR | Alternator |
| RE558675 | ALTERNATOR | Alternator |
| RE558676 | ALTERNATOR | Alternator |
| RE558678 | ALTERNATOR | Alternator |
| RES58675 | ALTERNATOR (24V, 60A) | Alternator |
| RM100225 | ALTERNATOR (REMAN FOR RE537146) (24 V, 50 A) (3104) | Alternator |
| SE502561 | ALTERNATOR (REMAN FOR RE537508) | Alternator |
| SE502626 | ALTERNATOR (REMAN FOR RE533516) (12V, 75A) (3138) | Alternator |
| SE502627 | ALTERNATOR (REMAN FOR RE533653) (12V, 95A) (3140) | Alternator |
| SE502628 | ALTERNATOR (REMAN FOR RE533654) (12V, 120A) (3141) | Alternator |
| RE536402 | SHORT BLOCK ASSEMBLY | Assembly |
| 100-024 | Belt | Belt |
| DZ118265 | FAN BELT | Belt |
| DZ118558 | FAN BELT | Belt |
| DZ118559 | FAN BELT | Belt |
| DZ118560 | FAN BELT | Belt |
| DZ118562 | FAN BELT | Belt |
| DZ118563 | FAN BELT | Belt |
| DZ118564 | FAN BELT | Belt |
| DZ118606 | FAN BELT | Belt |
| DZ118648 | FAN BELT | Belt |
| DZ118649 | FAN BELT | Belt |
| DZ118650 | FAN BELT | Belt |
| DZ118652 | FAN BELT | Belt |
| DZ118654 | FAN BELT | Belt |
| DZ119059 | FAN BELT | Belt |
| DZ119060 | FAN BELT (LGTH = 1555 mm) | Belt |
| DZ119061 | FAN BELT (LGTH = 1540 mm) | Belt |
| DZ119385 | FAN BELT (LGTH = 1650 mm) | Belt |
| DZ119477 | FAN BELT (LGTH = 1565 mm) | Belt |
| DZ119478 | FAN BELT (LGTH = 1570 mm) | Belt |
| DZ119515 | FAN BELT | Belt |
| DZ119522 | FAN BELT | Belt |
| DZ124645 | FAN BELT | Belt |
| F1000000005 | Belt | Belt |
| GM66704-1 | Fan Belt (12V) | Belt |
| GM66704-2 | Fan Belt (24V) | Belt |
| R525434 | FAN BELT (LGTH = 2180 mm) | Belt |
| R525435 | FAN BELT (LGTH = 2190 mm) | Belt |
| R533596 | FAN BELT | Belt |
| T428820 | FAN BELT (LGTH = 1580 mm) | Belt |
| SE501794 | COMPLETE BLOCK ASSEMBLY (without auxilary drive may not be as illustrated. Includes cylinder head with valves and rocker arm assembly, balancer shafts, oil pump assembly, complete gasket kit with front and rear seals) | Block assembly reman |
| SE501795 | COMPLETE BLOCK ASSEMBLY (auxiliary drive may not be as illustrated. Includes cylinder head with valves and rocker arm assembly, balancer shafts, oil pump assembly, complete gasket kit with front and rear seals) | Block assembly reman |
| SE503065 | AC COMPRESSOR (REMAN FOR AH169875) (12V, 10PA) (7427, 7414) | Compressor |
| F100-570 | CONTROL BOX ASSEMBLY | Control box |
| 100-037 | Coolant Filter | Coolant filter |
| F1000000004 | Coolant Filter | Coolant filter |
| F100-790 | ENGINE OPERATING PANEL ASSEMBLY | Engine operating panel |
| F100-680 | ENGINE & RADIATOR ASSEMBLY | Engine radiator |
| G122208 | Clarke Eng Fluid - 5 gal | Fluid |
| G122209 | Clarke Eng Fluid -1 gal | Fluid |
| 100-026 | Fuel Filter | Fuel filter |
| 25-1639 | Fuel Filters | Fuel filter |
| CO2775 | Element, Fuel Water Separator | Fuel filter |
| CO2776 | Element, Fuel Filter Primary | Fuel filter |
| DZ115390 | SECONDARY FUEL FILTER | Fuel filter |
| F1000000003 | Fuel Filter | Fuel filter |
| G021199 | Element, Fuel Filter Primary | Fuel filter |
| GM50006 | Fuel Filter | Fuel filter |
| GM50074 | Fuel Filter (primary) | Fuel filter |
| RE522868 | Fuel Filter | Fuel filter |
| RE541922 | PRIMARY FUEL FILTER | Fuel filter |
| RE544394 | FINAL FUEL FILTER | Fuel filter |
| RG11830A | Final Fuel Filter/Water Separator Base | Fuel filter |
| RG11830C | Replace Final Fuel Filter/Water Separator | Fuel filter |
| RG9091 | Final Fuel Filter Assembly | Fuel filter |
| RG12000 | Injection Pump Drive Gear Removal | Fuel pump |
| RG12002 | Injection Pump | Fuel pump |
| RG12022 | Fuel Supply Pump Push Rod | Fuel pump |
| RG12036 | JDG1559 Injection Pump Timing Pin | Fuel pump |
| RG7629B | Injection Pump Timing Marks A—Timing Mark on Front Plate B—Timing Mark on Injection Pump Flange | Fuel pump |
| RG7722 | Fuel Injection Pump | Fuel pump |
| RG9051 | Fuel Supply Pump Lines | Fuel pump |
| 0000I00 | Fuel Solenoid | Fuel solenoid |
| R136495 | Gasket | Gasket |
| R524468 | Gasket | Gasket |
| F100-460 | GENERATOR ASSEMBLY | Generator |
| F100-800 | GENERATOR ASSEMBLY | Generator |
| 302600 | Air/Oil Coalescer Element, spin-on canister | Hydraulic filter |
| RG12001 | Injector Pump Electrical Connector Removal | Injector |
| SE502671 | FUEL INJECTION NOZZLE (REMAN FOR RE545562) | Injector |
| F100-350 | NAME PLATE AND DECALS | Nameplate |
| 100-034 | Oil Filter | Oil filter |
| 223604 | Filter, oil | Oil filter |
| 25-1648 | Oil Filters | Oil filter |
| 302601 | Oil Filter Element for Compressor | Oil filter |
| 352793 | Oil Filter | Oil filter |
| 360031 | Filter, oil | Oil filter |
| C04521 | Element, Oil Filter | Oil filter |
| F1000000002 | Oil Filter | Oil filter |
| GM32809 | Oil filter | Oil filter |
| GM77161 | Oil Filter | Oil filter |
| RE504836 | OIL FILTER | Oil filter |
| 10000015220 | Panel, rear | Service part / kit |
| 10000015222 | Duct, rear | Service part / kit |
| 10000024262 | Decal, phase switch warning | Service part / kit |
| 10000024936 | Right rear corner assembly | Service part / kit |
| 10000024948 | Front hood assembly | Service part / kit |
| 10000024956 | Rear panel assembly | Service part / kit |
| 10000024971 | Foam, duct - side | Service part / kit |
| 10000024974 | Foam, rear duct - right | Service part / kit |
| 10000024975 | Left rear corner assembly | Service part / kit |
| 10000024976 | Left rear door assembly | Service part / kit |
| 10000024982 | Foam, control door | Service part / kit |
| 10000024983 | Foam, rear duct | Service part / kit |
| 10000024994 | Foam, rear duct - left | Service part / kit |
| 10000025002 | Foam, rear panel | Service part / kit |
| 10000027288 | Door, control - paralleling option | Service part / kit |
| 10000029864 | Decal set, MDG75 mechanical group | Service part / kit |
| 10000030536 | Foam, control door - paralleling option | Service part / kit |
| 10000030555 | Right rear corner assembly - paralleling | Service part / kit |
| 10000030564 | End panel assembly | Service part / kit |
| 10000030582 | Control door assembly - paralleling | Service part / kit |
| 12142 | Decal, ground | Service part / kit |
| 18396 | Decal, Panel Light Switch, Single | Service part / kit |
| 19M7838 | Screw | Service part / kit |
| 19M7862 | Screw | Service part / kit |
| 19M8306 | Screw | Service part / kit |
| 200389 | Frame & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200390 | Engine & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200391 | Generator & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200392 | Radiator & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200393 | Instruments & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200394 | Gator & Parts, GC-40 JD4045 T3 | Service part / kit |
| 200395 | Compressor & Parts, GCRS-40-40 JD4045 T3 | Service part / kit |
| 200396 | Cooler & Parts, GCRS-40-40 JD4045 T3 | Service part / kit |
| 200403 | Decal & Parts, GCRS-40-40 JD4045 T3 | Service part / kit |
| 20677W | Duct, rear air | Service part / kit |
| 20795SRV | Foam, corner common | Service part / kit |
| 20798SRV | Foam, duct - face | Service part / kit |
| 20916Z | Bracket, prop rod | Service part / kit |
| 21259 | Decal, Battery Charger (Optional) | Service part / kit |
| 22870 | Decal, Caution for 480V CSA | Service part / kit |
| 23597 | Decal, Panel Light Switch (Optional) | Service part / kit |
| 23827 | Decal, Controller Switches | Service part / kit |
| 23846 | Decal, Controller Instructions | Service part / kit |
| 24904 | Decal, 4 Pos. Outlet Usage in Delta (Optional for MMG100CAN Only) | Service part / kit |
| 26386 | Decal, Pinch Point | Service part / kit |
| 28964 | Decal, Engine Block Heater (Optional) | Service part / kit |
| 2911200025 | Standard P/N | Service part / kit |
| 2911200026 | Cold Start P/N | Service part / kit |
| 2911200027 | Standard P/N | Service part / kit |
| 2911200028 | Cold Start P/N | Service part / kit |
| 30175 | Decal, UN31A tank caution | Service part / kit |
| 30176 | Decal, Flex - Tier III | Service part / kit |
| 30401W | Panel, end | Service part / kit |
| 30402SRV | Foam, end panel | Service part / kit |
| 30645 | Panel, emergency stop | Service part / kit |
| 307398 | Relief Valve (drawn as 39124) | Service part / kit |
| 310-537-3700 | Main | Service part / kit |
| 310-637-3284 | Parts Department | Service part / kit |
| 310-638-8046 | Service Department | Service part / kit |
| 31024 | Decal, Fan Clutch (Optional) | Service part / kit |
| 32107W | Panel, left rear | Service part / kit |
| 32124W | Panel, side | Service part / kit |
| 32125SRV | Roof assembly | Service part / kit |
| 32286SRV | Foam, side panel | Service part / kit |
| 33313SRV | Control door assembly | Service part / kit |
| 33642 | Window, control door - UV | Service part / kit |
| 33787 | Decal, Generator - Voltage Configuration (MMG100CAN6 Only) | Service part / kit |
| 34274 | Decal, Generator - 600V Circuit Breakers (MMG100CAN6 Only) | Service part / kit |
| 34275 | Decal, Caution - 120V & 240V Outlets | Service part / kit |
| 34989SRV | Assembly, E-stop switch | Service part / kit |
| 393531 | Side panel assembly | Service part / kit |
| 50876 | Decal, positive battery disconnect | Service part / kit |
| 51552 | Decal, high temp | Service part / kit |
| 5E502446 | REMAN CYLINDER HEAD (FOR DZ103843) | Service part / kit |
| 5E502450 | REMAN CYLINDER HEAD (FOR DZ103845) | Service part / kit |
| 60095 | Nut, .312-18 sflg | Service part / kit |
| 60268 | Rivet, .188 dia. x .126 to .250 grip, SS | Service part / kit |
| 60505 | Nut, .312-18 U-clip - long type | Service part / kit |
| 61091 | Screw, .312-18 x 1.00 ser flg hd | Service part / kit |
| 61371 | Optional Rear Shaft Guard, GC-40 JD4045 T3 | Service part / kit |
| 65470 | Switch, E-stop operator | Service part / kit |
| 65580 | Block, E-stop contactor | Service part / kit |
| 800-421-1244 | Main | Service part / kit |
| 800-427-1244 | Parts Department | Service part / kit |
| 800-672-7877 | Parts Department | Service part / kit |
| 800-835-2551 | Service Department | Service part / kit |
| 9753300442 | Oil sample kit | Service part / kit |
| AR106083 | Plug | Service part / kit |
| C07575 | DC Engine Wiring | Service part / kit |
| C07651 | Optional Engine Jacket Water Heater | Service part / kit |
| DCA-70USJ | Battery Connections | Service part / kit |
| DCA-85USJ | Battery Connections | Service part / kit |
| DZ105796 | OCV FILTER | Service part / kit |
| DZ109713 | SHORT BLOCK ASSEMBLY | Service part / kit |
| DZ109717 | SHORT BLOCK ASSEMBLY | Service part / kit |
| DZ109718 | SHORT BLOCK ASSEMBLY | Service part / kit |
| DZ114640 | DIESEL EXHAUST FLUID (DEF) DOSING UNIT FILTER | Service part / kit |
| DZ114695 | DEF TANK INLET SCREEN | Service part / kit |
| DZ124403 | DIESEL EXHAUST FLUID INLINE FILTER | Service part / kit |
| F100-250 | WINGS | Service part / kit |
| F100-260 | WINGS | Service part / kit |
| F18910WAV65A | Name Plate And Decals | Service part / kit |
| F18910WAV66A | Generator Assembly | Service part / kit |
| F18910WAV70A | Control Box Assembly | Service part / kit |
| F18910WAV76A | Engine & Radiator Assembly | Service part / kit |
| F18910WAV80A | Engine Operating Panel Assembly | Service part / kit |
| F18910WAV84A | Output Terminal Assembly | Service part / kit |
| F18910WAV86A | Battery Assembly | Service part / kit |
| F18910WAV88A | Muffler Assembly | Service part / kit |
| F18910WAV90A | Fuel Tank Assembly | Service part / kit |
| F18910WAV96A | Enclosure Assembly | Service part / kit |
| F18910WAV98A | Radiator Cap - Removing the radiator cap while the engine is hot will result in high pressurized, boiling water to gush out of the radiator, causing severe scalding to any persons in the general area of the generator. | Service part / kit |
| F18910WAV99A | Coolant Drain Plug - Removing the coolant drain plug while the engine is hot will result in hot coolant to gush out of the coolant drain plug, therefore causing severe scalding to any persons in the general area of the generator. | Service part / kit |
| F18910WAVA0A | Engine Oil Drain Plug - Removing the engine oil drain plug while the engine is hot will result in hot oil to gush out of the oil drain plug, therefore causing severe scalding to any persons in the general area of the generator. | Service part / kit |
| G122188 | 250 hour Maintenance Kit (without fluids) | Service part / kit |
| G122189 | 250 hour Maintenance Kit (without fluids) | Service part / kit |
| G122190 | 250 hour Maintenance Kit (without fluids) | Service part / kit |
| G122191 | 250 hour Maintenance Kit (without fluids) | Service part / kit |
| G122192 | 250 hour Maintenance Kit (without fluids) | Service part / kit |
| G122193 | 250 hour Maintenance Kit (& engine fluids) | Service part / kit |
| G122194 | 250 hour Maintenance Kit (& engine fluids) | Service part / kit |
| G122195 | 250 hour Maintenance Kit (& engine fluids) | Service part / kit |
| G122196 | 250 hour Maintenance Kit (& engine fluids) | Service part / kit |
| G122197 | 250 hour Maintenance Kit (& engine fluids) | Service part / kit |
| G122198 | 500 hour Maintenance Kit (without fluids) | Service part / kit |
| G122199 | 500 hour Maintenance Kit (without fluids) | Service part / kit |
| G122200 | 500 hour Maintenance Kit (without fluids) | Service part / kit |
| G122201 | 500 hour Maintenance Kit (without fluids) | Service part / kit |
| G122202 | 500 hour Maintenance Kit (without fluids) | Service part / kit |
| G122203 | 500 hour Maintenance Kit (& Engine fluids) | Service part / kit |
| G122204 | 500 hour Maintenance Kit (& Engine fluids) | Service part / kit |
| G122205 | 500 hour Maintenance Kit (& Engine fluids) | Service part / kit |
| G122206 | 500 hour Maintenance Kit (& Engine fluids) | Service part / kit |
| G122207 | 500 hour Maintenance Kit (& Engine fluids) | Service part / kit |
| GM32386-KP1 | Exhaust Silencer, Hospital | Service part / kit |
| H23125 | Plug | Service part / kit |
| LX1016749 | Construct Dealer-Made Tools Safely | Service part / kit |
| M2872300204 | Parts List No. M2872300204 | Service part / kit |
| R111137 | Spring | Service part / kit |
| R113480 | FAN PULLEY | Service part / kit |
| R116296 | Cover | Service part / kit |
| R121043 | Oil Bypass Valve | Service part / kit |
| R123574 | Nut | Service part / kit |
| R128658 | FAN PULLEY | Service part / kit |
| R128659 | FAN PULLEY | Service part / kit |
| R128660 | FAN PULLEY | Service part / kit |
| R128661 | (OD = 183.5 mm) | Service part / kit |
| R128662 | FAN PULLEY (OD = 203 mm) | Service part / kit |
| R131765 | Plug | Service part / kit |
| R135918 | Bolt | Service part / kit |
| R502902 | Packing | Service part / kit |
| R503447 | Housing | Service part / kit |
| R503880 | CRANKSHAFT PULLEY | Service part / kit |
| R505567 | CRANKSHAFT PULLEY (OD = 173 mm) | Service part / kit |
| R515040 | Bushing | Service part / kit |
| R516648 | Cap Screw | Service part / kit |
| R517208 | Pulley | Service part / kit |
| R517237 | Bushing | Service part / kit |
| R520896 | Valve Cover | Service part / kit |
| R521326 | Valve Cover | Service part / kit |
| R521327 | Valve Cover | Service part / kit |
| R521401 | Medallion | Service part / kit |
| R522409 | Heat Shield | Service part / kit |
| R545125 | CRANKSHAFT PULLEY (OD = 188 mm) | Service part / kit |
| R545126 | CRANKSHAFT PULLEY (OD = 168 mm) | Service part / kit |
| RC115 | 12VDC SuperStart RC115 battery | Service part / kit |
| RE501377 | Filler Neck | Service part / kit |
| RE527858 | Screw M6 x 12 | Service part / kit |
| RE528742 | Deflector | Service part / kit |
| RE535560 | Filler Cap | Service part / kit |
| RE571269 | Piston marked RE509540; SUB FOR RE65957; also order RE527042 and DD15664; also order R503880, R515040 and R516648 or R505567, R515040 and R516648. | Service part / kit |
| RE67238 | Screw | Service part / kit |
| RE67239 | Screw | Service part / kit |
| RG11931 | Right Side of Engine | Service part / kit |
| RG11932 | Left Side of Engine | Service part / kit |
| RG12003 | Disconnect Fuel Delivery Lines | Service part / kit |
| RG7778 | UN—11NOV97 | Service part / kit |
| RG9060 | Dubuque Engine Serial Number Plate | Service part / kit |
| RG9061 | Saran Engine Serial Number Plate | Service part / kit |
| RG9062 | Torreon Engine Serial Number Plate | Service part / kit |
| RM100171 | COMPLETE BLOCK ASSEMBLY | Service part / kit |
| SE501094 | CONNECTING ROD (REMAN FOR RE500608) (4838) | Service part / kit |
| SE501096 | CONNECTING ROD | Service part / kit |
| SE501806 | CYLINDER HEAD (REMAN FOR RE531088) (5127) | Service part / kit |
| SE502447 | REMAN CYLINDER HEAD (FOR DZ103844) | Service part / kit |
| SE502768 | CYLINDER HEAD (REMAN FOR RE588246) | Service part / kit |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.
Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.
Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.
The John Deere 4045TF120 engine has an oil capacity of 13.5 liters.
The John Deere 4045TF120 has a displacement of 4.48 liters with 4 cylinders.
The John Deere 4045TF120 powers 8 generator set(s), including John Deere 4045TF120, Kohler 60REOZJ, SDMO J 66 K, SDMO J 77 K, SDMO J60.
The John Deere 4045TF120 uses oil filter part numbers John Deere RE519987, John Deere DZ112582, John Deere DZ118286.
The John Deere 4045TF120 uses fuel filter part numbers John Deere AE29052, John Deere AR29586R, John Deere AR50041.
The John Deere 4045TF120 uses air filter part numbers John Deere AL204809, John Deere T138857, John Deere AR79680.