Home TroubleshootingMQ Power GA-6H

MQ Power GA-6H Troubleshooting

MQ Power GA-6H troubleshooting: 9 fault codes and symptom-cause-remedy entries from the manufacturer's own service documentation.

MQ Power GA-6H — full specs, parts & maintenance.

All MQ Power fault codes →

Troubleshooting

9

Symptoms & remedies

SymptomCauseRemedy
High fuel consumption, loss of power and excessive carbon buildup in the combustion chamberA clogged air cleanerCleaning the air cleaner
Engine breakdownsFollow the diagnosis based on the Engine Troubleshooting information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.
Generator does not startFaulty spark plugReplace the spark plug
Engine oil level switch issueCheck and replace the oil level switch if necessary
Air filter element problemClean or replace the air filter element
Recoil starter malfunctionInspect and repair or replace the recoil starter
Rectifier failureReplace the rectifier
Circuit breaker issueCheck and replace the circuit breaker if necessary
Fuel cock assembly problemInspect and repair or replace the fuel cock assembly

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.

Common questions

MQ Power GA-6H: High fuel consumption, loss of power and excessive carbon buildup in the combustion chamber — what causes it?

Documented causes: A clogged air cleaner. See the table for the matching fixes.

MQ Power GA-6H: Generator does not start — what causes it?

Documented causes: Faulty spark plug. See the table for the matching fixes.