Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Yamaha›Starting the Engine (Manual Starting)

Yamaha EF3000iSE — Starting the Engine (Manual Starting)

Operation

For the Yamaha EF3000iSE, from the Yamaha owner's manual.

Procedure

  1. Turn fuel cock knob to ON.
  2. Pull choke knob fully out.
  3. Turn engine switch to ON.
  4. Pull recoil starter slowly until engaged, then briskly.
  5. Warm up until engine does not stop when choke is returned.
  6. Push choke knob back to original position.

Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Yamaha repair guides →