Yamaha EF2400iS — AC Connection
Operation · AC receptacle
For the Yamaha EF2400iS, from the Yamaha owner's manual.
Before you start
- Be sure all electric devices including lines and plug connections are in good condition before connection.
- Be sure any electric devices are turned off before plugging in.
- Be sure the total load is within generator rated output.
Procedure
- Wind the power lead 2 or 3 turns around handle.
- Start the engine.
- Plug in to the AC receptacle.
- Make sure the AC pilot light is on.
- Turn on any electric devices.
Specs & values
- Do not use AC and DC power at the same time
Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.