Yamaha EF1000iS / EF2800i — Muffler Screen and Spark Arrester
Maintenance
For the Yamaha EF1000iS / EF2800i, from the Yamaha owner's manual.
Before you start
- Engine and muffler will be very hot after running
Procedure
- Remove the muffler screen
- Use a flathead screwdriver to pry the spark arrester out from the muffler
- Remove the spark arrester
- Remove carbon deposits using a wire brush
- Check the muffler screen and spark arrester, replace if damaged
- Install the spark arrester, aligning the lump to the hole in the muffler pipe
- Install the muffler screen
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.