Yamaha EF1000iS / EF2400iSHC — Engine oil replacement
Maintenance
For the Yamaha EF1000iS / EF2400iSHC, from the Yamaha owner's manual.
Before you start
- Avoid draining engine oil immediately after stopping the engine; oil is hot
Procedure
- Place generator on level surface, warm up engine, then stop
- Remove rubber cap on bottom
- Place oil pan under engine, remove oil drain bolt and gasket
- Open oil filler cover and remove oil filler cap to drain oil completely
- Check drain bolt, gasket, oil filler cap and O-ring; replace if damaged
- Install oil drain bolt
- Install rubber cap on bottom
- Add engine oil to upper level
- Install oil filler cap
- Close oil filler cover
Specs & values
- Oil drain bolt torque: 17 Nm (1.7 m·kgf, 12 ft·lbf)
- Engine oil quantity: 0.6 L
Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.