Yamaha EF1000iS / EF2000iS — Engine oil replacement
Maintenance
For the Yamaha EF1000iS / EF2000iS, from the Yamaha owner's manual.
Before you start
- Avoid draining the engine oil immediately after stopping the engine; the oil is hot.
- Do not tilt the generator when adding engine oil.
Procedure
- Place an oil pan under the engine and tilt the generator to drain the oil completely
- Place the generator on a level surface
- Remove the oil filler cap
- Add engine oil to the upper level
- Wipe the cover clean and wipe up any spilled oil
- Install the oil filler cap
- Install the cover and tighten the screws
Tools required
- oil pan Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.