Yamaha — AC Connection
Operation · AC output
From a Yamaha owner's manual covering: EF4000DE, EF5200DE, EF6600DE, YG4000D, YG5200D, YG6600D. Check it applies to your exact model before use.
Before you start
- Be sure all electric devices including lines and plug connections are in good condition before connection.
- Be sure any electric devices are turned off before plugging it in.
- Be sure the total load is within generator rated output.
Procedure
- Wind the power lead 2 or 3 turns around frame.
- Start the engine.
- Plug into the AC receptacle.
- Make sure the voltage meter indicates the rated voltage (or the pilot light is on for YG4000D).
- Turn the AC switch (N.F.B.) and economy idle switch to ON and turn on any electric devices.
Specs & values
- Voltage adjuster used to adjust output voltage to rated voltage (EF5200DE/EF6600DE)
Source: Yamaha owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.