Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Wisconsin›Starting Procedure

Wisconsin — Starting Procedure

Operation · engine

From a Wisconsin service manual covering: FM-X4B7D, V-460D, V-461D, V-465D, V460D, V461D, V465, Y-128-S1, YB-85A. Check it applies to your exact model before use.

Browse Wisconsin generators & specs →

Before you start

  • Do not start engine with clutch engaged.

Procedure

  1. Check crankcase oil level and fuel supply. Open fuel valve.
  2. Disengage clutch, if furnished.
  3. New engines require priming; refer to Fuel Pump paragraph.
  4. Set throttle about 1/2 open if variable speed governor control.
  5. With two-speed control, start in full load position.
  6. Turn ignition-starting switch to start; pull choke out only sufficient to start.
  7. Release choke button to open position after engine starts; re-choke if it tends to stop.
  8. If flooding occurs, continue cranking with choke open.

Source: Wisconsin service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Wisconsin repair guides →