Home›Repair guides›Winco›YourGen Meter Battery Replacement

Winco WL16000HE-03/A — YourGen Meter Battery Replacement

Repair & overhaul · controller

For the Winco WL16000HE-03/A, from the Winco service manual.

Browse Winco generators & specs →

Before you start

  • Battery located near potentially live AC terminals - risk of electrocution

Procedure

  1. Disconnect main battery and spark plug wire, open receptacle panel
  2. Pry back plate off meter using top slot
  3. Pull out old battery with needle nose pliers
  4. Install new battery positive side down between connections
  5. Replace back plate and secure receptacle panel
  6. Reconnect unit's main battery

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

Source: Winco service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Winco repair guides →