Winco HPS9000VE-03/A — Changing the Oil

Maintenance · engine

For the Winco HPS9000VE-03/A, from the Winco service manual.

Browse Winco generators & specs →

Procedure

1. Start the engine and warm it up, stop the engine and remove the spark plug wire
2. Remove the oil drain bolt at base of engine and drain oil into approved container
3. Replace the oil drain bolt making sure the sealing washer is in place
4. With the engine level, fill with new oil
5. Replace filler plug
6. Start engine and warm it up
7. After warming up, recheck the oil level and refill as necessary

Source: Winco service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Winco repair guides →