Winco HPS9000VE-03/A — Changing Fuel Types: LP/NG to Gasoline

Operation · fuel system

For the Winco HPS9000VE-03/A, from the Winco service manual.

Browse Winco generators & specs →

Procedure

1. With engine running, turn off the LP/NG fuel supply
2. Run the engine until it runs out of fuel
3. Remove the flexible fuel line from the demand regulator
4. Reinstall the plastic insert in the regulator
5. Check that the gasoline fuel valve is off
6. Fill the gasoline fuel tank
7. Turn on the gasoline fuel valve
8. Start the engine

Source: Winco service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Winco repair guides →