Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Westinghouse›Starting an Electric Start Generator

Westinghouse WH6000 — Starting an Electric Start Generator

Operation · Engine

For the Westinghouse WH6000, from the Westinghouse owner's manual.

Browse Westinghouse generators & specs →

Before you start

  • Ensure battery is fully charged before attempting start
  • Do not hold starter more than 10 seconds

Procedure

  1. Verify battery is connected and charged.
  2. Move fuel shutoff valve to ON position.
  3. Move choke lever to ON position (if cold start).
  4. Move engine control switch to START position and hold.
  5. Release when engine starts.
  6. Once engine starts, move choke lever to OFF position.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Battery: 12V, 14A

Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westinghouse repair guides →