Westinghouse WH6000 — Checking and Cleaning Spark Plug
Maintenance
For the Westinghouse WH6000, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Before you start
- Always remove spark plug wire before servicing
Procedure
- Remove spark plug wire from spark plug.
- Using spark plug socket, remove spark plug.
- Check spark plug gap and adjust if needed.
- Clean spark plug electrode with wire brush.
- Reinstall spark plug.
- Reinstall spark plug wire until boot fully engages tip.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Check/clean at 100 hours or 6 months
- Replace at 300 hours or 1 year
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.