Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Westinghouse›Starting the Generator - Electric Start

Westinghouse WH5500 — Starting the Generator - Electric Start

Operation · Engine

For the Westinghouse WH5500, from the Westinghouse owner's manual.

Browse Westinghouse generators & specs →

Before you start

  • Do not hold START position while engine is running
  • Battery provides self-charging while engine runs

Procedure

  1. Verify battery is properly installed with both battery cables attached.
  2. Make sure circuit breakers are properly set.
  3. Move fuel shutoff valve to ON position.
  4. Move choke lever to ON position.
  5. Push and hold engine control switch in START position until engine starts.
  6. Release engine control switch once engine starts; it will move to RUN position automatically.
  7. As engine starts and stabilizes, gradually move choke lever to OFF position.
  8. If engine fails to start after 5 seconds, release switch and wait 15 seconds before retrying.

Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westinghouse repair guides →