Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Westinghouse›Testing the GFCI Outlets

Westinghouse WH10KPRO — Testing the GFCI Outlets

Testing & diagnosis

For the Westinghouse WH10KPRO, from the Westinghouse owner's manual.

Browse Westinghouse generators & specs →

Procedure

  1. Start the generator and allow it to warm up.
  2. Press the test button on the outlets.
  3. Verify the reset button pops out.
  4. If reset button does not pop out, GFCI outlets must be repaired before use.
  5. Press the reset button to reset the GFCI outlet; LED light should be lit and power restored.

Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westinghouse repair guides →