Westinghouse WH10KPRO — Cleaning the Engine Oil Cooler
Maintenance
For the Westinghouse WH10KPRO, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Procedure
- Remove the screws for the oil cooler.
- Remove the oil cooler guard and the oil cooler.
- Inspect the oil fins for dirt and debris; clean using compressed air not exceeding 30 psi (207 kPa).
- Install the oil cooler and guard using the screws.
Specs & values
- {'item': 'Max compressed air pressure', 'value': '30', 'unit': 'psi (207 kPa)'}
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.