Westinghouse WH10KPRO — Checking Engine Oil
Maintenance
For the Westinghouse WH10KPRO, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Before you start
- Internal crankcase pressure can spray hot oil when removing a hot dipstick; allow oil to cool first.
Procedure
- Always operate or maintain the generator on a flat surface.
- Stop engine if running.
- Let engine sit and cool for several minutes to equalize crankcase pressure.
- With a damp rag, clean around the oil dipstick.
- Remove oil dipstick.
- Insert dipstick fully, then remove and check oil level; acceptable level is between the H and L lines.
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.