Westinghouse WH1000i / WH2000i — Storage Procedure for Greater Than 3 Months
Maintenance · inverter
For the Westinghouse WH1000i / WH2000i, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Procedure
- Clean the inverter.
- Drain all gasoline from the fuel tank.
- Start engine and run until remaining gasoline in fuel lines and carburetor is consumed and engine shuts off.
- Change the oil.
- Remove spark plug and place about 1 tablespoon of oil in spark plug opening; pull recoil handle to turn engine over several times.
- Replace the spark plug.
- Move inverter to a clean, dry place for storage.
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.