Westinghouse WH1000i / WH2000i — Draining the Float Bowl
Maintenance · carburetor
For the Westinghouse WH1000i / WH2000i, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Before you start
- Never dispose of fuel into sewer, ground, or waterways
Procedure
- Remove engine service panel to access carburetor.
- Locate clear plastic hose from float exiting bottom of inverter; place container under it.
- Loosen float bowl drain screw until fuel drains.
- Allow fuel to drain into container, then tighten drain screw.
- Install engine service panel.
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.