Westinghouse WH1000i / WH2000i — Checking Engine Oil
Maintenance
For the Westinghouse WH1000i / WH2000i, from the Westinghouse owner's manual.
Browse Westinghouse generators & specs →
Before you start
- Always check/add oil on flat, level surface
Procedure
- Operate or maintain the inverter on a flat surface.
- Stop engine if running.
- Let engine sit and cool for several minutes.
- Remove engine service panel to access oil fill/drain plug.
- Clean around the oil fill/drain plug with damp rag.
- Remove the oil fill/drain plug.
- Check oil level: acceptable if oil is visible at bottom of threads of oil fill plug.
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.