Home›Repair guides›Westerbeke›Changing the Fuel Filter (32.0 KW)

Westerbeke — Changing the Fuel Filter (32.0 KW)

Maintenance · Engine fuel filter

From a Westerbeke operator's manual covering: 16.0 BEDA, 20.0 BED, 25.0 BED, 32.0 BEDA. Check it applies to your exact model before use.

Applies to: Westerbeke 20.0 BED, Westerbeke 25.0 BED

Parts for this job

Part numbers from the service-parts lists for Westerbeke 20.0 BED, Westerbeke 25.0 BED. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Shut off the fuel supply.
  2. Open the bleed screw on top of the filter and drain the bowl.
  3. Close the drain and unscrew the bolt securing the bowl; bowl and filter drop down.
  4. Clean the base and install a new sealing ring squarely in the base recess.
  5. Replace the upper sealing ring and the o-ring in the filter head.
  6. Install the new filter element and re-install the retaining bolt.
  7. Bleed the air from the filter assembly.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Westerbeke 20.0 BED →, Westerbeke 25.0 BED →

Source: Westerbeke operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westerbeke repair guides →