Wayback_Service — Trowel Blade Removal and Installation

A Wayback_Service service procedure — check it applies to your exact model before use.

Browse Wayback_Service generators & specs →

Procedure

1. Remove the blade
2. Using a wire brush, scrape all concrete particles and foreign debris from the trowel arm
3. Install the new trowel blade onto the trowel arm. Make sure blade is installed correctly, maintaining the proper orientation for direction of rotation
4. Reinstall the three bolts and lock washers that secure the blade to the trowel arm
5. Tighten all three bolts securely
6. Repeat steps 1-4 for all remaining blades

Source: manual:BA-SERIES-rev-6-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.