Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Pump Control Lever Neutral Adjustment

Wayback_Service — Pump Control Lever Neutral Adjustment

A Wayback_Service service procedure — check it applies to your exact model before use.

Browse Wayback_Service generators & specs →

Before you start

  • Sensitive adjustment needed

Procedure

  1. Place wheels on blocks.
  2. Locate adjustment bolt.
  3. Loosen jam nut.
  4. Start engine.
  5. Test wheel movement.
  6. Adjust bolt in small increments.
  7. Turn counterclockwise for reverse creep.
  8. Turn clockwise for forward creep.

Specs & torque values

  • 1/32 to 1/16 inch neutral position

Source: manual:Buggies-WBH21-EF-EPA--rev-0-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.