Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Oil Drain and Change

Wayback_Service — Engine Oil Drain and Change

A Wayback_Service service procedure — check it applies to your exact model before use.

Browse Wayback_Service generators & specs →

Before you start

  • Dispose of used oil properly. NEVER pour used oil on the ground or down a drain. Used oil can usually be taken to your local recycling center or service station for reclamation. ALWAYS follow all environmental rules and regulations in your area concerning the disposal of hazardous waste such as used oil and oil filters.
  • ALWAYS drain the engine oil while the oil is warm.

Procedure

  1. Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container.
  2. Replace the engine oil with the recommended oil type as listed in Table 6. For engine oil capacity, see Table 1. DO NOT overfill.
  3. Reinstall the drain bolt with sealing washer and tighten securely.

Source: manual:BPX-rev-4-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.