Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Normal Shutdown

Wayback_Service — Engine Normal Shutdown

A Wayback_Service service procedure — check it applies to your exact model before use.

Browse Wayback_Service generators & specs →

Procedure

  1. Remove the flexible shaft and vibrator head from the concrete mix.
  2. Place the throttle lever in the UP position (TURTLE) and run the engine for three minutes at idle speed.
  3. Place the ON/OFF switch located on the left strap to the OFF position.
  4. Move the fuel valve lever to the OFF position.
  5. Place the engine ON/OFF switch in the OFF position.

Source: manual:BPX-rev-4-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.