Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Idle Speed Adjustment

Wayback_Echo-Usa — Idle Speed Adjustment

A Wayback_Echo-Usa service procedure — check it applies to your exact model before use.

Browse Wayback_Echo-Usa generators & specs →

Before you start

  • When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result

Procedure

  1. Check idle speed and reset if necessary.
  2. If a tachometer is available, set idle speed screw to the specifications found on Specifications page.
  3. Turn idle screw clockwise to increase idle speed.
  4. Turn idle screw counterclockwise to decrease idle speed.

Tools required

  • Tachometer (optional)

Specs & torque values

  • Idle speed specification from manual

Source: manual:filev2_.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.