Home›Repair guides›Waukesha›Magneto Timing, Right Bank

Waukesha TH570 — Magneto Timing, Right Bank

Adjustments · Right bank magneto

For the Waukesha TH570, from the Waukesha service manual.

Applies to: Waukesha 570 and 884 engine

Before you start

  • Magnetos are not interchangeable between banks.

Procedure

  1. Turn engine until cylinder No. 2 is at TDC compression.
  2. Align D.C. RIGHT bank marking with timing pointer.
  3. Insert lead wire into tower No. 1 of right magneto.
  4. Turn right magneto drive shaft counterclockwise until spark occurs.
  5. Hold position.
  6. Insert right magneto into crankcase cover hole.
  7. Lock magneto with clamps and nuts.

Source: Waukesha service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Waukesha repair guides →