Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Winter Storage Preparation - Engine Oil and Fuel Mixture

Watermota.Ro — Winter Storage Preparation - Engine Oil and Fuel Mixture

For these Watermota.Ro models: CM2.16, CM3.27.

Browse Watermota.Ro generators & specs →

Before you start

  • Do not rev up the engine with this protective mixture!

Procedure

  1. Have the engine running for some 10 minutes with a protective mixture of 10% lubrication oil and 90% of clean diesel fuel.
  2. Replace the oil filter and change the engine lubrication oil with a good quality of oil with protective properties.
  3. Use idling revolutions only, do not rev up during this process.

Specs & torque values

  • Protective fuel mixture: 10% lubrication oil and 90% clean diesel fuel

Source: manual:CM216_CM327_manual_web_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.