Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Turbo Charger Removal

Volvo Penta — Turbo Charger Removal

A Volvo Penta service procedure — check it applies to your exact model before use.

Browse Volvo Penta generators & specs →

Before you start

  • Dispose of oil and coolant in accordance with applicable environmental regulations

Procedure

  1. Mark up and loosen all cabling and terminal boxes. Loosen the exhaust bend.
  2. Drain and collect the remaining oil and coolant.
  3. Remove the air filter and crankcase ventilation hose.
  4. Remove the hose between the turbocharger and the air filter.
  5. Remove the mounting nuts and the turbo charger.
  6. Remove the oil pressure pipe, oil return pipe, and charger air pipe.

Source: manual:Volvo Penta Workshop Manual (Group 20-26) Product Code 7740922 2007 EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.