Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Pre-heat the coolant with a separately installed elec-

Volvo Penta EDC 4 — Pre-heat the coolant with a separately installed elec-

For the Volvo Penta EDC 4.

Browse Volvo Penta generators & specs →

Before you start

  • IMPORTANT! Make sure that the cooling sys-
  • WARNING! Never use start spray or similar

Procedure

  1. 1. Check that the auxiliary batteries are connected
  2. (series or parallel) so that the rated voltage cor-
  3. responds to the engine system voltage.

Source: manual:volvo_tad722ge_opm.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.