HDT — Adjustment with

For the HDT.

Procedure

1. 0.5 sec.
2. NA
3. Underfrequency
4. Dropout Time
5. 3 sec.
6. NA
7. * Optional accessory board required for time delay adjustments.
8. NA = not adjustable
9. [ Allows for three 15 sec. crank attempts separated by two 15 sec.
10. rest periods.
11. Figure 2-2
12. Time Delays

Source: manual:MP6346.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.