Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Energize the ATS equipment as described in Sections 6.1.2

Transfer Switches - Eaton Cutler Hammer ATC-300 — Energize the ATS equipment as described in Sections 6.1.2

For the Transfer Switches - Eaton Cutler Hammer ATC-300.

Applies to: Transfer Switches Eaton Cutler Hammer Atc 300

Before you start

  • CAUTION TO AVOID TOUCHING ELECTRICAL CONNECTIONS
  • Note:The ATC-300 Logic Controller provides the capability to set the

Procedure

  1. After the Time Delay Emergency to Normal timer (TDEN)
  2. The Time Delay for Engine Cool-Off (TDEC - Feature 4)

Source: manual:ATC 300 2 pos Contactor ATS Instruction manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.