Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›YOUR GENERATOR SET OPERATIONS AND INSTALLATION MAN-

Transfer Switches - Eaton Cutler Hammer ATC-300 — YOUR GENERATOR SET OPERATIONS AND INSTALLATION MAN-

For the Transfer Switches - Eaton Cutler Hammer ATC-300.

Applies to: Transfer Switches Eaton Cutler Hammer Atc 300

Before you start

  • NOTICE
  • The ATC-300 Logic Controller provides the capability to set the

Procedure

  1. No Load Engine Test;
  2. Load Engine Test; or
  3. Disabled.
  4. Load Engine Test
  5. After the Time Delay Emergency to Normal timer
  6. The Time Delay for Engine Cool-Off (TDEC - Feature
  7. Alternate operational tests may be possible depending
  8. If you attempt to manually operate the ATS with the

Source: manual:Wall Mount Instr manual with ATC 300.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.